An effective approach to maintaining uninterrupted coolant flow in heat supply systems—and thereby reducing energy consumption—is to prevent the formation of corrosion-scale deposits on the inner surfaces of metal pipes. This is typically achieved by performing anti-corrosion treatment on the coolant. However, the efficiency of this method depends on several factors, including pipe conditions, water flow rate, and water composition. To inhibit corrosion and scale formation on the internal surfaces of pipelines, specific inhibitors are used to create protective films on the metal surface. For strong adhesion of these films, preliminary chemical cleaning of the metal surface with low-concentration acid solutions is essential. This cleaning is usually performed in circulation mode for several hours. The activated surface enhances inhibitor adhesion, leading to the formation of films with improved protective properties. The quality of the anticorrosive films was evaluated using a JSM-6490LV scanning electron microscope equipped with INCAEnergy energy-dispersive microanalysis systems, HKL-Basic structural analysis, ContrAA-300 atomic adsorption spectrometer, and potentiostat IPC-Pro MF.