Given its capacity to generate 2-D fine images of observation areas, very high-resolution (VHR) synthetic aperture radar (SAR) has become increasingly popular in myriad fields, including remote sensing, geoscience, and surveillance. In this article, we present a comprehensive overview of VHR SAR systems and imaging to highlight the related research and promote further development. First, we provide a summary of VHR SAR applications and summarize the typical airborne and spaceborne systems. Subsequently, a detailed overview is provided to demonstrate the range VHR technologies by introducing dechirp processing, stepped-frequency, and microwave photonic. Additionally, VHR imaging methods on different platforms, i.e., ideal trajectory, airborne, and spaceborne, are reviewed. Finally, the challenges and prospects of VHR SAR are presented to inform future research directions. This work provides a valuable resource to improve the system design and signal processing of VHR SAR.

The video synthetic aperture radar (ViSAR) is a new application in radar techniques. ViSAR provides high- or moderate-resolution SAR images with a faster frame rate, which permits the detection of the dynamic changes in the interested area. A moving target with moderate velocity can be detected by shadow detection in ViSAR. This paper analyses the frame rate and the shadow feature, discusses the velocity limitation of ViSAR moving target shadow detection and quantitatively gives the expression of velocity limitation. Furthermore, a fast factorized back projection (FFBP) based SAR video formation method and a shadow-based ground moving target detection method are proposed to generate SAR videos and detect the moving target shadow. The experimental results with simulated data prove the validity and feasibility of the proposed quantitative analysis and the proposed methods.

Wavenumber domain algorithms have unique advantages in processing highly squinted synthetic aperture radar (SAR) data. This paper studies the performance of three commonly used wavenumber domain algorithms including the classical wavenumber domain (CWD) algorithm, extended wavenumber domain (EWD) algorithm, and squint wavenumber domain (SWD) algorithm. First, the wavenumber domain signal expression under the zero-Doppler (ZD) and acquisition-Doppler (AD) reference geometries are both derived. Second, the internal relationship between three wavenumber domain algorithms is analyzed. A new interpretation of the relationship between the three algorithms and an interpolation strategy are given. The analysis not only provides a deeper understanding of the three algorithms, but also provides a basis for comparing them. Then, the performance of the three wavenumber domain algorithms is evaluated from the perspectives of computational complexity, image quality and geometric position through theoretical analysis and simulation experiments. Aiming at the problem that the range and azimuth profiles are not orthogonal, a method to calculate resolution and extract profile is proposed. The results show that all three algorithms can obtain a well-focused images if full-resolution interpolation is performed, and the computational complexityies of CWD and SWD are less than that of EWD.

Motion error is one of the most serious problems in airborne synthetic aperture radar (SAR) data processing. For a smoothly distributing backscatter scene or a seriously speed-varying velocity platform, the autofocusing performances of conventional algorithms, e.g., map-drift (MD) or phase gradient autofocus (PGA) are limited by their estimators. In this paper, combining the trajectories measured by global position system (GPS) and inertial navigation system (INS), we propose a novel error compensation method for varying accelerated airborne SAR based on the best linear unbiased estimation (BLUE). The proposed compensating method is particularly intended for varying acceleration SAR or homogeneous backscatter scenes, the processing procedures and computational cost of which are much simpler and lower than those of MD and PGA algorithms.

The holographic subsurface radar (HSR) is recognized as an effective remote sensing modality for the detection of shallowly buried objects with a high-resolution image in plain view. However, subsurface detection with HSR is prone to be impaired by clutter contamination, which often obscures the target response. In this letter, a novel clutter mitigation method combining singular value decomposition (SVD) and response cross correlation analysis is presented. The proposed method first applies SVD to decompose the radar data matrix to a number of singular components. Furthermore, the signal cross correlation characteristics are analyzed to demonstrate that the variance of left singular vectors is directly proportional to the target proportion in radar data. Then, target and clutter subspaces can be identified by maximizing the defined weighted target-to-clutter ratio (WTCR). Results of numerical simulation and laboratory experiments corroborate the effectiveness of the proposed method in reducing clutter while preserving the target image.

The high-resolution low frequency synthetic aperture radar (SAR) has serious range-azimuth phase coupling due to the large bandwidth and long integration time. High-resolution SAR processing methods are necessary for focusing the raw data of such radar. The generalized chirp scaling algorithm (GCSA) is generally accepted as an attractive solution to focus SAR systems with low frequency, large bandwidth and wide beam bandwidth. However, as the bandwidth and/or beamwidth increase, the serious phase coupling limits the performance of the current GCSA and degrades the imaging quality. The degradation is mainly caused by two reasons: the residual high-order coupling phase and the non-negligible error introduced by the linear approximation of stationary phase point using the principle of stationary phase (POSP). According to the characteristics of a high-resolution low frequency SAR signal, this paper firstly presents a principle to determine the required order of range frequency. After compensating for the range-independent coupling phase above 3rd order, an improved GCSA based on Lagrange inversion theorem is analytically derived. The Lagrange inversion enables the high-order range-dependent coupling phase to be accurately compensated. Imaging results of P- and L-band SAR data demonstrate the excellent performance of the proposed algorithm compared to the existing GCSA. The image quality and focusing depth in range dimension are greatly improved. The improved method provides the possibility to efficiently process high-resolution low frequency SAR data with wide swath.