Mechanical properties of undisturbed root–soil composites were investigated through direct shear tests under different cementation concentrations by microbially induced carbonate precipitation (MICP). The results show that MICP has a significant strengthening effect on the undisturbed root–soil composite, and the maximum shear strength increases by about 160% after grouting. The shear strength of root–soil composites increases with the increase in calcium chloride concentration, and the shear strength increases the most when the concentration is 0.75M. Calcium carbonate formed by MICP treatment has cementitious properties, which increases the cohesion and internal friction angle of the root–soil composite by about 400% and 120%, respectively. The results show that it is feasible to solidify slope and control soil erosion together with microbial and vegetation roots. The research results can serve as a scientific basis and reference for the application of MICP technology in vegetation slope protection engineering.

In order to investigate the mechanical behavior of shale rock under cyclic loading and unloading condition, two kinds of incremental cyclic loading tests were conducted. Based on the result of the short‐term uniaxial incremental cyclic loading test, the permanent residual strain, modulus, and damage evolution were analyzed firstly. Results showed that the relationship between the residual strains and the cycle number can be expressed by an exponential function. The deformation modulus E₅₀ and elastic modulus E_S first increased and then decreased with the peak stress under the loading condition, and both of them increased approximately linearly with the peak stress under the unloading condition. On the basis of the energy dissipation, the damage variables showed an exponential increasing with the strain at peak stress. The creep behavior of the shale rock was also analyzed. Results showed that there are obvious instantaneous strain, decay creep, and steady creep under each stress level and the specimen appears the accelerated creep stage under the 4th stress of 51.16 MPa. Based on the characteristics of the Burgers creep model, a viscoelastic‐plastic creep model was proposed through viscoplastic mechanics, which agrees very well with the experimental results and can better describe the creep behavior of shale rock better than the Burgers creep model. Results can provide some mechanics reference evidence for shale gas development.