The phase field crystal (PFC) method is a new multiscale method, which can reproduce physical phenomena on an atomic level and on a diffusion time scale for the microstructure evolution of materials. The morphology of microcrack propagation and the branch of single crystal materials under tensile strain with a fixed grip condition are simulated by using PFC coupling with an external field method. The results show that microcrack propagation depends a lot on the applied strain. The crack starts to grow and branch when the strain reaches a critical value for biaxial tension. The temperature parameter may also have an effect on crack propagation and the branch. In order to indicate the connection between the PFC results and materials behavior, the energy balance approach is used to analyze the mechanism of crack extension, and also the critical value of the strain for crack extension is obtained. The simulated results are in good agreement with other simulation results and experimental results.
The phase-field-crystal (PFC) method is used to investigate migration of grain boundary dislocation and dynamic of strain-driven nucleation and growth of deformed grain in two dimensions. The simulated results show that the deformed grain nucleates through forming a gap with higher strain energy between the two sub-grain boundaries (SGB) which is split from grain boundary (GB) under applied biaxial strain, and results in the formation of high-density ensembles of cooperative dislocation movement (CDM) that is capable of plastic flow localization (deformed band), which is related to the change of the crystal lattice orientation due to instability of the orientation. The deformed grain stores the strain energy through collective climbing of the dislocation, as well as changing the orientation of the original grain. The deformed grain growth (DGG) is such that the higher strain energy region extends to the lower strain energy region, and its area increase is proportional to the time square. The rule of the time square of the DGG can also be deduced by establishing the dynamic equation of the dislocation of the strain-driven SGB. The copper metal is taken as an example of the calculation, and the obtained result is a good agreement with that of the experiment.