Kozo paper, usu-mino-gami, is frequently used as the first back lining paper of hanging scrolls in order to support the main paper with a painting or a work of calligraphy on it. To dye it an appropriate color, paper is often treated with an alkali mordant solution. However, current kozo paper products have received such comments from conservators that wet tensile strength is weak and hard to handle. Therefore, improving the wet tensile strength of kozo paper is required. In previous papers, the effect of the sheet forming method, cooking condition, and parenchyma cell content between fibers on the wet tensile strength of kozo paper has been investigated. In this paper, the effect of glucuronoxylan, the main component of hardwood hemicellulose on the wet tensile strength of kozo paper was investigated. The wet tensile strength of kozo paper, when made in different cooking conditions, was evaluated using the Finch device. Glucuronoxylan content in fiber was analyzed using GC-FID. According to the results, it has been proved that glucuronoxylan content (with a xylan to glucan molar ratio of 4.43% to 5.16%) itself contributes to the wet tensile strength of the kozo sheet. Therefore, to increase the wet tensile strength of kozo paper, it is recommended to cook under milder conditions, thus retaining a higher amount of glucuronoxylan in the pulp.

Cyanotypes, known as photographs and architectural plans made by photo-reproduction from the 19th and 20th centuries, are subjects for conservation. Wet cleaning for conservation treatment has been reported to be unsuitable for cyanotypes because Prussian blue on cyanotypes is thought to move physically with the application of water. The manner in which Prussian blue is fixed onto the paper substrate is important for determining the treatment method. This study is the first step toward clarifying this mechanism. The presence of Prussian blue in cyanotypes was first confirmed using X-ray diffraction analysis (XRD). Then, the location of Prussian blue in the fibre was confirmed using optical microscopy and micro-Raman spectroscopy analysis, by observing the blue colour and by detecting its cyanide bond. With field-emission scanning electron microscopy (FE-SEM), particles approximately 20–100 nm in size were observed on the surface of cyanotype paper fibres, and particles approximately 20–50 nm in size were observed from the cross-section of the paper fibres. The location where the particles were observed agreed with the location where the blue colour was observed and cyanide bond was detected. The fact that the sensitiser solution soaked into the paper fibres and formed Prussian blue within the paper fibres when exposed to light is thought to be important for the blue fixation of cyanotypes.

In this study, Kozo fibres were fibrillated using the stone wet milling method and the wet atomisation method both deriving from nanocellulose production processes. Kozo fibres with a high degree of external fibrillation were obtained by using the stone mill wet grinding method. Although fibres exhibited the same structure as untreated Kozo fibres, their bonding properties improved. Applying the wet atomisation method, fibrillated Kozo fibres with different degrees of fibrillation were obtained depending on the number of treatments. Fibrillated Kozo fibres can be used in conservation as an adhesive for lining and other stabilisation treatments and may in certain cases replace starch paste, which is susceptible to microbiological damage. Only Kozo fibres and water were used in both mechanical fibrillation methods; therefore, the resulting material can be considered a safe alternative to more traditional adhesives.

Cyanotypes are prints made by photo-reproduction and are often found as photographs and architectural plans from the 19th and 20th centuries. They are prepared by applying a sensitiser solution to ...