Lunar surface operations conducted by the United States and the Soviet Union confirmed that penetration resistance is a key indicator for evaluating the engineering properties of lunar regolith. To quantitatively assess the influence of reduced gravity on penetration resistance, this study employed a newly developed Geotechnical Magnetic-gravity Modeling Test (GMMT) system to perform cone penetration tests under controlled gravitational acceleration levels of 1/6 g, 1 g, and 2 g. The results indicated that the normalized penetration resistance increased as gravity decreased, and this effect was amplified at higher relative densities. To investigate the underlying mechanisms, discrete element method (DEM) simulations were conducted. The findings revealed that, in addition to gravity, in situ factors such as high relative density and irregular particle morphology also significantly enhanced penetration resistance by strengthening interparticle contact and friction. These non-gravitational effects partially offset the expected reduction in resistance under lower gravity, leading to a smaller-than-anticipated decline. This study provides new insights into the gravity-dependent penetration behavior of lunar regolith.
With the launch of the Artemis program and the International Lunar Research Station project, the construction of lunar bases has emerged as a global research focus. In situ manufacturing technologies for robust lunar regolith-based building materials are critical to ensuring building safety under the Moon’s extreme environmental conditions. This paper reviews the relevant advancements in two areas: solidification technologies for lunar regolith-based construction materials and simulation techniques of extreme lunar environments. This review reveals that, although significant advancements have been made in solidification technologies, the development of lunar environment simulation technologies, particularly for 1/6 g gravity, has lagged, thereby hindering the assessment of the in situ applicability of these solidification methods. To address these limitations, this paper introduces a newly developed comprehensive lunar extreme environment simulation system based on superconducting magnetic suspension technology and its potential applications in lunar regolith-based construction material solidification. This review highlights the current progress and challenges in solidification techniques for lunar regolith-based building materials, aiming to enhance researchers’ attention to the extreme environmental conditions on the lunar surface.
Understanding the mechanical behavior of lunar regolith is critical for the success of future lunar excavation and construction missions. Irregular particle morphology and low geostatic stress are recognized as key factors contributing to the high internal friction angle of this unique extraterrestrial geomaterial. However, the underlying mechanisms by which low geostatic stress enhances shear strength remain unclear, and the multiscale effects of particle morphology on shear strength evolution are not yet fully elucidated. In this study, consolidated drained triaxial compression tests were performed on CUMT-1 lunar regolith simulant and Fujian standard sand to investigate their macroscopic mechanical behavior. Complementary discrete element simulations of biaxial compression were conducted to analyze mesoscopic mechanical responses of granular materials under the influence of multiscale particle morphology and confining stress. A robust macroscopic–mesoscopic strength correlation model was established, incorporating normalized mean interparticle contact force and mean coordination number to predict the normalized deviatoric stress of granular assemblies. Based on this model, the mesoscopic mechanisms through which irregular particle morphology and low geostatic stress enhance the internal friction angle were quantitatively investigated. The findings offer new insights into the shear strength characteristics of in situ lunar regolith and provide theoretical support for lunar surface construction and excavation operations.
Future lunar mining missions are expected to involve deeper geological conditions. Understanding the mechanical behaviors of the lunar subsurface regolith is essential to operational safety. Recent findings from the Chang’e-4 and Chang’e-5 missions revealed a marked increase in particle size and relative density of lunar regolith with depth. In addition, the geostatic stress naturally increases with depth. These three variables pose significant challenges for accurately predicting the shear strength. Existing predictive models, such as the Alshibli model, fail to account for the distinct conditions of lunar subsurface regolith. To address this, consolidated drained triaxial tests were conducted on the CUMT-1 lunar regolith simulants. The influences of confining pressure, relative density, and particle size distribution on shear strength were systematically analyzed. A novel indicator, named inter-particle void ratio, was introduced to capture the combined effects of relative density and particle size distribution. Based on this indicator, a new empirical model was proposed for predicting peak shear strength under varying subsurface conditions. The results suggest that deeper lunar regolith may have significantly lower shear strength than previously estimated, primarily due to the combined effect of increased inter-particle void ratio and geostatic stress. This finding has important implications for the assessment of excavation efficiency, underground construction stability, and the overall safety of lunar subsurface infrastructure.
The stability performance of the frozen curtain formed under standpipe freezing is closely associated with the weak zone penetrated by thermal gradient-related fracture (TGF). The TGF-rich zone further affects the liquid phase flow when the frozen curtain is thawed. However, there is a lack of studies on the TGF-rich zone within the frozen curtain. To address this gap, a simplified and practical 2D bonded particle model-based numerical simulation strategy was developed to identify the possibility of acquiring field characteristics of the TGF-rich zone by conducting numerical tests on samples considering size effects. The results, validated by the experiment, indicated that the influence of size on crack localization zone was comparable to that of the parameter gradient but had a weaker characteristic on crack orientation, which represents the orientation of TGF. In particular, the characterization result of the TGF-rich zone using crack localization zone in the simulation closely matched that using lateral strain localization zone both in simulation and experiment. Regarding the size effects of the TGF-rich zone revealed in the simulation, the estimated field length of the TGF-rich zone accounted for approximately 30% of the zone width characterized by a horizontal thermal gradient, with maximum orthotropic deformation occurring at about 10% of the zone width. These observations validate the existence of TGF within the frozen curtain and contribute to the development of a precise grouting technique to mitigate subsidence within soil deposits subjected to freeze-thaw.