Jilong Zhao

Dr. Jilong Zhao


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 January 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
JZJilong Zhao
Jilong Zhao
XQXiaowei Quan
Xiaowei Quan
XTXiangqian Tong
Xiangqian Tong
Mingyao LinMingyao Lin
Mingyao Lin
In this paper, a novel double-rotor hybrid excited axial switched-flux permanent magnet (DRHE-ASFPM) machine incorporating the advantages of the axial switched-flux permanent magnet (PM) machine and wound field synchronous machine is investigated. Similar to the switched-flux PM machine, there is a large undesired cogging torque in the DRHE-ASFPM machine because of high air-gap density and strong flux-focusing effect. This paper presents and compares three cogging torque reduction techniques in the DRHE-ASFPM machine, including stator/rotor teeth notching, stator slot chamfering, as well as stator slot chamfering and teeth notching (SCTN). The analytical expression of the cogging torque is derived and three methods are analyzed and compared in detail. As verified by 3-D finite element (FE) method, the SCTN technique can effectively reduce the cogging torque extremely, but slightly decrease the output torque under both PM and hybrid excitation modes. Finally, an optimized prototype machine with SCTN structure is manufactured, and the experiment is performed to validate the FE predicted results.

13 April 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
JZJilong Zhao
Jilong Zhao
XQXiaowei Quan
Xiaowei Quan
XSXiangdong Sun
Xiangdong Sun
JLJie Li
Jie Li
Mingyao LinMingyao Lin
Mingyao Lin
This paper proposes a novel axial flux rotor consequent-pole permanent magnet (AFRCPPM) machine with improved torque density. The key is to place the PMs between the adjacent rotor teeth with switched-flux feature compared to the stator permanent magnet (PM) dual-stator axial switched-flux PM (DS-ASFPM) machine. This will be able to obtain simple stator structure, high power density and large torque output capability. In the following paper, the topology, operating principle and winding configuration are analyzed in detail. According to the theoretical derivation, the major parameters of the AFRCPPM machine are acquired. Based on 3-D finite-element (FE) method, the electromagnetic performance of the AFRCPPM machine and DS-ASFPM machine is comparatively investigated to evaluate their characteristics. The FE-predicted results indicate that the AFRCPPM machine exhibits simple stator structure, sinusoidal back-EMF and high power/torque density. Moreover, under the same armature current, the AFRCPPM machine has larger output torque compared to the DS-ASFPM machine. Hence, it has a good prospect in electric vehicle (EV) or hybrid EV.

13 January 2020 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
JZJilong Zhao
Jilong Zhao
XQXiaowei Quan
Xiaowei Quan
XSXiangdong Sun
Xiangdong Sun
Mingyao LinMingyao Lin
Mingyao Lin
SNShuangxia Niu
Shuangxia Niu
In this paper, a novel stator-permanent magnet (PM) double-rotor hybrid excited axial switched-flux PM (DRHE-ASFPM) machine with improved torque density and enhanced flux regulation capability is proposed for electrical vehicle (EV) application. The operation principle is introduced and different operating modes including only PM, flux-enhancing and flux-weakening modes are analyzed and compared based on the 2-D finite element analysis (FEA). The influences of different stator/rotor pole combinations on the electromagnetic performance of the DRHE-ASFPM machine, including 6-stator-pole/10-, 11-, 13-, and 14-rotor-pole, are quantitatively compared in terms of the flux-linkage, back-EMF and spectra, air-gap flux density, cogging torque, and flux regulation capability by 3-D FEA. The analysis results demonstrate that the 6/10- and 6/11-pole DRHE-ASFPM machines show higher amplitude of PM flux-linkage and back-EMF. Meanwhile, the 6/11- and 6/13-pole machines display smaller cogging torque. Moreover, the 6/11- pole machine produces more sinusoidal back-EMF and has excellent flux regulation capability as well as torque output capability, which is suitable for wide speed-regulation EV application.

19 June 2023 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
JZJilong Zhao
Jilong Zhao
ZLZhuolin Lu
Zhuolin Lu
QHQingfeng Han
Qingfeng Han
LWLixuan Wang
Lixuan Wang
LWLei Wang
Lei Wang
In this paper, a novel six-phase axial switched-flux permanent magnet (PM) machine with stator-PM is proposed and designed. The topology and operating principle are analyzed in detail. Two different winding configurations, which are called the symmetric double-three-phase and asymmetric double-three-phase, are presented and studied. The electromagnetic performance of the machine with two winding configurations, including flux-linkage, back electromotive force, inductance, torque characteristics, and so on, is investigated. The behavior of the machine under the healthy and faulty conditions is analyzed and the fault-tolerant performance is researched. The prototype is manufactured and the experimental results are consistent with that of the finite element analysis. The results demonstrate that the performance of the machine with two winding configurations is excellent. The machine with asymmetric double-three-phase winding configuration has high quality PM flux-linkage and back-EMF, low cogging torque and torque ripple, and strong fault-tolerant capability. The machine with symmetric double-three-phase winding configuration has large torque capacity.

16 July 2018 in Energies
Verified
Journal Article
Open access
PDF file
JZJilong Zhao
Jilong Zhao
XQXiaowei Quan
Xiaowei Quan
MJMengdie Jing
Mengdie Jing
Mingyao LinMingyao Lin
Mingyao Lin
NLNian Li
Nian Li
In this paper, an axial field switched-flux permanent magnet (AFSFPM) machine with stator-PM, which has a high power/torque density and efficiency feature as well as shorter axial length, is designed, analyzed and controlled. The topology, operating principle and design procedure of the AFSFPM machine are labored and discussed. The electromagnetic performance, including the flux linkage, back-EMF, cogging torque, winding inductance and field-control capability, are studied based on 3-D finite-element analysis (FEA). In order to investigate the operating performance of the machine in the whole speed range, a continuous-control-set model predictive control (MPC) method for the AFSFPM machine is proposed. Based on the stage control targets, the maximum torque per ampere (MTPA) and maximum output power flux-weakening strategies are presented in constant torque and constant power regions, respectively. Finally, a prototype of AFSFPM machine has been manufactured and experimentally evaluated and the results show that the MTPA strategy increases the load capability and the flux-weakening strategy broadens the constant power operation range. Moreover, the anti-load-disturbance capacity and dynamic response performance are improved under the MPC method. As a result, the proposed AFSFPM machine drive system is excellent alternative for electrical vehicles (EVs) or hybrid EVs (HEVs).

16 April 2024 in IEEE Access
Verified
Journal Article
Open access
JZJilong Zhao
Jilong Zhao
QWQing Wang
Qing Wang
QHQingfeng Han
Qingfeng Han
In this paper, a novel axial flux reversal permanent magnet (PM) (AFRPM) machine, which combines the merit of the axial flux PM (AFPM) machine and flux reversal PM machine, is proposed. Meanwhile, according to the characteristics of the machine, a method to reduce the torque ripple is presented and researched. Firstly, the topology and operation principle of the machine are analyzed. The power-size equation is derived and the design scheme is confirmed to obtain the structure parameters of the machine. Then, the general electromagnetic performances are analyzed. Secondly, the magnetomotive force (MMF)-permeance model is established. The air gap flux density harmonic distribution principle is researched from the air gap field modulation perspective. The torque generation mechanism is studied by analyzing the influences of the armature reaction air gap flux density harmonics and no-load air gap flux density harmonics on the electromagnetic torque. Furthermore, in order to reduce the torque ripple, an optimization method using the cos-type PMs, which suppress the harmonic pole pairs that do not contribute to the torque output, is investigated. To simplify the manufacturing process, the segmented sector PMs with different heights and arcs are employed instead of the cos-type PM. The effects of the different numbers of segmented sector PMs on the torque ripple are studied. Finally, the results indicate that the proposed machine exhibits large torque capability and high power/torque density. Meanwhile, the torque ripple is significantly reduced by the optimization method.