The decomposed plastic products in the natural environment evolve into tiny plastic particles with characteristics such as small size, lightweight, and difficulty in removal, resulting in a significant pollution issue in aquatic environments. Significant progress has been made in microplastic separation technology benefiting from microfluidic chips in recent years. Based on the mechanisms of microfluidic control technology, this study investigates the enrichment and separation mechanisms of polystyrene particles in an unbuffered solution. The Faraday reaction caused by the bipolar electrodes changes the electric field gradient and improves the separation efficiency. We also propose an evaluation scheme to measure the separation efficiency. Finite element simulations are conducted to parametrically analyze the influence of applied voltages, channel geometry, and size of electrodes on plastic particle separation. The numerical cases indicate that the electrode-installed microfluidic channels separate microplastic particles effectively and precisely. The electrodes play an important role in local electric field distribution and trigger violent chemical reactions. By optimizing the microchannel structure, applied voltages, and separation channel angle, an optimal solution for separating microplastic particles can be found. This study could supply some references to control microplastic pollution in the future.
Surface topography plays a critical role in determining the tribological performance of engineering surfaces. This study systematically investigates the lubrication film characteristics of bump array surfaces (isotropic and anisotropic), groove surfaces, and herringbone surfaces through point-contact elastohydrodynamic lubrication (EHL) analyses. Numerical simulations were conducted to evaluate the influences of surface topographical parameters on the lubrication performance, which is quantified by average film thickness and contact load ratio. The results indicate that transverse textures lead to thicker average film as compared with longitudinal textures. This is mainly because the transverse textures can generate more effective hydrodynamic pressures from the oil film behind the ridges due to micro-EHL. By analyzing the topographical parameters and their impacts on the average film thickness and contact load ratio, this study provides practical guidance for designing surface topographies that optimize average film thickness, applicable to a wide range of tribological systems.
1 September 2022 in International Journal of Applied Mechanics