Energy storage systems are becoming increasingly important as more renewable energy systems are integrated into the electrical (or power utility) grid. Low-cost and reliable energy storage is paramount if renewable energy systems are to be increasingly integrated into the power grid. Lead-acid batteries are widely used as energy storage for stationary renewable energy systems and agriculture due to their low cost, especially compared to lithium-ion batteries (LIB). However, lead-acid battery technology suffers from system degradation and a relatively short lifetime, largely due to its charging/discharging cycles. In the present study, we use Machine Learning methodology to estimate the battery degradation in an energy storage system. It uses two types of datasets: discharge condition and lead acid battery data. In the initial analysis, the Support Vector Regression (SVR) method with the RBF kernel showed poor results, with a low accuracy value of 0.0127 and RMSE 5377. On the other hand, the Long Short-Term Memory (LSTM) method demonstrated better estimation results with an RMSE value of 0.0688, which is relatively close to 0.
Energy storage systems are becoming increasingly important as more renewable energy systems are integrated into the electrical (or power utility) grid. Low-cost and reliable energy storage is paramount if renewable energy systems are to be increasingly integrated into the power grid. Lead-acid batteries are widely used as energy storage for stationary renewable energy systems and agriculture due to their low cost, especially compared to lithium-ion batteries (LIB). However, lead-acid battery technology suffers from system degradation and relatively short lifetime, largely due to its charging/discharging cycles. In the present study, we use Machine Learning methodology to estimate the battery degradation in an energy storage system. It uses two types of datasets: discharge condition and lead acid battery data. The use of the Long Short-Term Memory (LSTM) model algorithm for estimating battery Remaining Useful Lifetime (RUL) is a promising development that has the potential to significantly improve battery performance/durability and reduce maintenance costs. The initial State of Health (SOH) and predicted SOH values provide insights into battery aging and RUL estimation for lead-acid batteries in the renewable energy systems for agricultural purposes.
Thermal agents (TAs) have exhibited promise in clinical tests when utilized in cancer thermal therapy (TT). While rapid degradation of TAs may address safety concerns, it limits the thermal stability required for effective treatment. TAs, which possess exceptional thermal stability, experience gradual deterioration. There are few approaches that effectively address the trade-off between improving thermal stability and simultaneously boosting material deterioration. Here, we control the thermal character of tungsten disulfide (WS2)-based 2D materials by utilizing an M13 phage through Joule heating (the M13–WS2–PEG nanostructures were generated and termed a tripartite (T) nanostructure), and developed a T nanostructure-driven TT platform (we called it T-TT) for efficient thermal ablation of clinically relevant MCF-7 cells. A relative cell viability of ~59% was achieved, as well as onset time of degradation of ~0.5 week. The T-TT platform also discloses an energy density of 5.9 J/mL. Furthermore, the phage-conjugated WS2 can be utilized to achieve ultrasound imaging for disease monitoring. Therefore, this research not only presents a thermal agent that overcomes TA limitations, but also demonstrates a practical application of WS2-type material system in ultra-energy efficient and effective cancer therapy.
Conventional soldered interconnects—necessarily requiring high-temperature processes to melt solder (tin)—are posing reliability challenges to crystalline silicon solar cell modules due to residual stress stemming from the mismatch of the coefficient of thermal expansion of the materials involved. On the other hand, electrically conductive adhesives (ECAs) have been shown to exhibit sufficiently promising improvements in mechanical and electrical properties to be used as silicon solar cell interconnects. However, the current ECA technology is dominated by ECAs with dispersed silver particles, which makes them costly and could cause embrittlement of the ECA at higher concentrations. This study investigates the potential application of a novel ECA, with composite metal particles, made of a nickel and Sn95Ag4Cu1 solder mixture and dispersed in a high-density polyethylene matrix for the solar cell interconnection. The test PV modules show comparable electrical and mechanical performance to that of soldered cell modules, despite the fact that the ECA application is still rather early in its learning curve. The present study suggests that the novel ECA could lead to a promising alternative to the conventional soldering process and the more costly silver-filled ECAs.
1 December 2025 in IOP Conference Series: Earth and Environmental Science
Solar power is a feasible replacement for fossil fuel-based energy sources since it reduces carbon footprints and greenhouse gas emissions, qualities needed for the fight against climate change. Still, solar energy constantly faces societal, environmental, and technical obstacles. Advanced computing techniques such as artificial intelligence (AI) can help to alleviate some of these technical challenges. This paper uses the PRISMA approach on the Scopus database for bibliometric analysis to investigate AI applications in Solar Photovoltaics (PV). We then arrange publication themes, analyse the publishing pattern to identify the most significant journals and publications using author keyword data. Co-occurrence analysis and trend visualisation were assessed using VOSviewer and Biblioshiny. Based on the findings, India, China, the United States, and Saudi Arabia dominate the publishing output, with high citation counts and extensive collaboration networks. Interestingly, four institutions in Saudi Arabia emerged as the lead with the most publication counts in this field. To identify current research gaps and future directions, we also evaluated hotspots and recent advancements in the AI applications within Solar PV research. AI-driven forecasting, fault detection, performance monitoring, cybersecurity, and Internet of Things (IoT) integration, which enables real-time and autonomous decision making, could potentially take the front stage in future renewable energy research.