Electronic nose systems are widely used in environmental monitoring and other related fields. In recent years, systems based on gas sensor arrays have attracted considerable attention. However, relying solely on improvements in gas-sensitive materials has struggled to break through the bottleneck in recognition accuracy. To address this challenge, this study designs and validates an integrated machine learning framework for enhanced gas identification in electronic nose systems. Specifically, (1) a Butterworth low-pass filter is combined with principal component analysis (PCA) to suppress sensor noise; (2) the synthetic minority over-sampling technique (SMOTE) is utilized for training set data augmentation to further enhance the classification accuracy of the support vector machine (SVM); and (3) the relationship between single-component and mixed-gas responses is analyzed to construct an artificial neural network (ANN) regression model. Experimental results demonstrate that the SMOTE-augmented, PCA-optimized SVM model achieves a recognition accuracy of 0.93 ± 0.08 for most target gases, representing improvements of 19% and 7% over decision tree and ANN classifiers, respectively, and that the ANN regression model attains a correlation coefficient of 99.55% between predicted and measured values in mixed-gas experiments. Overall, the construction and optimization of this system demonstrate significant practical value for intelligent gas identification and the development of advanced e-nose devices.

Thermal sensors are widely used in medical, industrial and other fields, where the requirements for high sensitivity and portability continues to increase. Here we propose a suspended bridge structure fabricated using MEMS, which effectively shrinks the size and reduces heat loss. This study reviews current sensor-related theories of heat conduction, convective heat transfer and thermal radiation. Heat loss models for suspended and non-suspended bridge structures are established, and finite element analysis is conducted to evaluate their thermal performance. The thermal performance of the suspended bridge structure is further validated through infrared temperature measurements on the manufactured sensor device. Theoretical calculations demonstrate that the proposed suspension bridge structure reduces heat loss by 88.64% compared with traditional designs. Benefiting from this improved heat retention, which was also confirmed by infrared thermography, the thermal sensor fabricated based on the suspension bridge structure achieves an ultra-high sensitivity of 0.38 V/W and a fast response time of less than 200 ms, indicating a high accuracy in thermal characterization. The correlation coefficient obtained for the sensor output voltage and input power of the sensor is approximately 1.0. Based on this design, multiple microfluidic channels with suspended bridge structures can be integrated to realize multi-component detection, which is important for the development of multifunctional biomedical detection.