The Noble–Abel Stiffened-Gas (NASG) equation of state (Le Métayer, O. and Saurel, R. proposed in 2016) is extended to variable attractive and repulsive effects to improve the liquid phase accuracy when large temperature and pressure variation ranges are under consideration. The transition from pure phase to supercritical state is of interest as well. The gas phase is considered through the ideal gas assumption with variable specific heat rendering the formulation valid for high temperatures. The liquid equation-of-state constants are determined through the saturation curves making the formulation suitable for two-phase mixtures at thermodynamic equilibrium. The overall formulation is compared to experimental characteristic curves of the phase diagram showing good agreement for various fluids (water, oxygen). Compared to existing cubic equations of state, the present one is convex, a key feature for computations with hyperbolic flow models.
Mie–Grüneisen type equations of state (EOS) are widely used to describe the thermodynamics of solids, liquids, and gases in a variety of physics problems, including shock wave dynamics in condensed materials and the thermodynamic behavior of dense gases generated by detonation waves. The Jones–Wilkins–Lee (JWL), Cochran–Chan, and original Mie–Grüneisen EOSs are relevant examples. However, these EOSs present several major difficulties. First, their range of validity is limited because these EOSs are fitted to a reference curve and tolerate only small deviations from that curve. The second difficulty lies in the complexity of the mathematical formulations, affecting the efficiency of pressure relaxation solvers. These two difficulties give rise to a third. Under extreme flow conditions, computational failures are quite common. Methods for “extending” the equations of state are often used to continue the computations. For example, below a certain arbitrary density, the JWL EOS is sometimes extended to the ideal-gas EOS. A fundamentally new method is presented in this work. It consists of using the much simpler Noble–Abel-stiffened-gas EOS as a predictor, to close the corresponding flow model. A thermodynamic relaxation step follows the prediction step. The solution is projected onto the target EOS, in this case the Mie–Grüneisen EOS, with the help of additional transport equations. Therefore, the flow model is an extended version, much more efficient for numerical resolution. This method solves the three problems above by extending the validity domain of the thermodynamic formulation, making the relaxation solvers much faster, and dramatically increasing the robustness of computations.
Most engineering tools dealing with detonation waves in condensed explosives are based on the reactive Euler equations, which involve a thermodynamic closure based on temperature and pressure equilibrium conditions. Indeed, the reactant and the detonation products are assumed to evolve in mechanical and thermal equilibrium. Although the assumption of thermal equilibrium is physically questionable, the reactive Euler equations are used for convenience. This choice is supported by several reasons. When considering thermal equilibrium, the assessment of thermal exchanges between the reactant and the detonation products is simplified, as no exchange coefficient needs to be determined. Furthermore, the reactive Euler equations are in conservative form and the shock relations are well-defined. This model appears to be the simplest option for addressing detonations in condensed explosives. However, this simplicity has limitations and conceals a subtle difficulty that can lead to pathological detonations. The present contribution investigates this difficulty and presents a global exothermic condition to preserve exothermic detonations in the frame of temperature–pressure equilibrium flow models. This condition depends on the equations of state only. It is independent of the kinetics used to model the decomposition of the explosive. By meticulously selecting the thermodynamic parameters of the equations of state for the reactant and detonation products, pathological detonations are prevented, thereby maintaining a globally exothermic reaction consistent with the Zeldovich–von Neumann–Döring theory.
This paper deals with detonation waves in condensed explosives in the context of pressure and temperature equilibrium models. Most engineering solvers for detonation waves in condensed explosives are based on the reactive Euler equations, which model flows evolving in both temperature and pressure equilibrium conditions. Although the assumption of thermal equilibrium is physically questionable, the reactive Euler equations remain the most popular model because of its convenience. Conventional methods rely on Mie–Grüneisen equations of state (EOS) and are challenged by their limited applicability, high computational complexity, and frequent failure. A previous publication addressed these issues by using the Noble–Abel-stiffened-gas EOS as a predictor, followed by a relaxation step to map the solution to the physical target EOS. This novel thermodynamic relaxation framework was originally introduced in the context of mechanical equilibrium. The present work builds on this novel method to encompass both mechanical and thermal equilibrium, thus enabling the treatment of detonation waves in condensed explosives within the framework of pressure and temperature equilibrium models. The proposed method is capable of treating both interfacial flows through “diffuse interface” formulations, and mixture flows in mechanical and thermal equilibrium. In addition, the proposed method demonstrates improved computational robustness, a significant increase in efficiency, and greater flexibility.
Computation of gas dispersal in urban places or hilly grounds requires a large amount of computer time when addressed with conventional multidimensional models. Those are usually based on two-phase flow or Navier-Stokes equations. Different classes of simplified models exist. Among them, two-layer shallow water models are interesting to address large-scale dispersion. Indeed, compared to conventional multidimensional approaches, 2D simulations are carried out to mimic 3D effects. The computational gain in CPU time is consequently expected to be tremendous. However, such models involve at least three fundamental difficulties. The first one is related to the lack of hyperbolicity of most existing formulations, yielding serious consequences regarding wave propagation. The second is related to the non-conservative terms in the momentum equations. Those terms account for interactions between fluid layers. Recently, these two difficulties have been addressed in Chiapolino and Saurel (2018) and an unconditional hyperbolic model has been proposed along with a Harten-Lax-van Leer (HLL) type Riemann solver dealing with the non-conservative terms. In the same reference, numerical experiments showed robustness and accuracy of the formulation. In the present paper, a third difficulty is addressed. It consists of the determination of appropriate drag effect formulation. Such effects also account for interactions between fluid layers and become of particular importance when dealing with heavy-gas dispersion. With this aim, the model is compared to laboratory experiments in the context of heavy gas dispersal in quiescent air. It is shown that the model accurately reproduces experimental results thanks to an appropriate drag force correlation. This function expresses drag effects between the heavy and light gas layers. It is determined thanks to various experimental configurations of dam-break test problems.