In the paper is proposed methodology for iterative three-dimensional computer modeling of secondary optical lenses for street LED luminaires by using of Photopia and AutoCAD software. The methodology allows achieving of various desired light distributions of the luminaires by iteratively modifying the three-dimensional shape of the secondary lens. The created three-dimensional models of optical lenses shown are tested by Monte Carlo raytracing photometric analysis. The results confirm the performance and the possibilities for application of the proposed methodology.
The article describes a modelling and simulation research for thermal and electromagnetic processes in the system “induction boiler – electronic converter”. The results obtained are useful for the heater physical prototyping. The equivalent electrical parameters of the heater are defined in addition, in order to provide optimal design of the electronic converter. The control system of the device is developed based on microcontroller Arduino with developed program code.
In this paper is described the design and implementation of a device for non-contact ultrasonic studying of materials. Presented is a scheme solution of the device, into which are provided several key features for work with purpose for greater versatility. There are presented block diagrams of algorithms of the software necessary for some modes of work of the device with microcontroller PIC16F84A. These modes are related to the way for excitation of the ultrasonic transmitter and the synchronization of measurement. The principle of work of the system is described in details.
A methodology for iterative optimization of optical systems for street LED luminaires intended for roads designed according to luminance requirement is proposed in the paper. The methodology comprises the following stages: iterative change of the shape of secondary lens of a computer model of the optical system, photometric analysis using the Monte Carlo raytracing method of the modelled three-dimensional optical systems to calculate their photometric characteristics, optimal road lighting calculations with an optimum criterion – maximum luminaire spacing meeting the requirements of standard for the selected M6 lighting class of the road, through the analysis of which the optimal solution is found.
The main innovative technologies and the principle of operation of OLED, FOLED, PHOLED, TOLED, QLED and RGB diodes are examined in this work. Luminous efficiency and the operating time dependencies on the working temperature of the diode are presented. The highly efficient light sources presented are also considered from the point of view of their energy use: for their production, use and subsequent safe disposal. In this way, an economic and environmental assessment of the benefits of their use in industry and households has been made.
The present work considers virtual simulations and modeling of an inductor-piece system for induction cooker. As a result of the study an approach for calculating the equivalent parameters of an induction-piece system in an induction cooker, based on the finite element method. The computer investigation and analysis are expanded by modelling processes in COMSOL Multiphysics 5.4. An electromagnetic and temperature model of the equivalent inductor-piece system in an induction cooker is proposed. Electromagnetic and temperature field modelling at different operating frequencies of the power supply has been performed. The results obtained are used in virtual prototyping and industrial electronics training. The proposed methodology, coupled with modern computing, provides new opportunities for optimizing and improving the energy performance of industrial and home devices and systems.