Zygmunt Mikno

Dr. Zygmunt Mikno

Deputy Director for Research, Sieć Badawcza Łukasiewicz–Instytut Spawalnictwa (Łukasiewicz Research Network–Institute of Welding), Gliwice, Poland

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 February 2017 in Welding in the World
Verified
Journal Article
Open access
PDF file
Zygmunt MiknoZygmunt Mikno
Zygmunt Mikno
MSMariusz Stepien
Mariusz Stepien
BGBoguslaw Grzesik
Boguslaw Grzesik
The paper is focused on the control of resistance projection welding process applied in joining of thin-walled metal elements. The motion of electrode is generated by electric servo actuator that controls the force exerted on electrode or alternatively, just travel itself of electrode. The projection welding has been discussed for welding of 1.5 mm thick DX53 steel sheets where one sheet contains an embossed projection. Apart of electric servo actuator, another source of force has been described, i.e. pneumatic actuator (classical one), for the reason of comparison. The solution where the electric servo operates together with appropriate algorithm makes the new solution that is alternative for classical, pneumatic one. Optimized motion of electrode due to new proposed source of electrode force or/and travel, based on relevant algorithm yields improved quality of joints.

22 August 2018 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
Zygmunt MiknoZygmunt Mikno
Zygmunt Mikno
The projection welding of nuts performed using the pneumatic (electrode) force system (PFS) was subjected to thorough numerical and experimental analysis, enabling the identification of the window of welding parameters taking into consideration boundary conditions including expulsion, torsional strength and the deformation of the nut thread. The welding process was subjected to optimisation involving the use of a new, i.e. electromechanical (electrode) force system (EFS). The optimisation-related approach involved the reduction of welding current and the extension of a welding current flow time in comparison with those obtained when using the pneumatic force system. It was assumed that the acceptance criterion would be the breaking torque not lower than that obtained under the most favourable welding conditions performed using the PFS. The research work involved comparative numerical calculations (performed using the SORPAS software) in relation to both, i.e. the PFS and EFS. The technological welding tests were performed using inverter welding machines (1 kHz) provided with various (electrode) force systems. The research work also included metallographic tests, hardness measurements and torsional strength tests. As a result of the application of EFS and a special innovative hybrid algorithm for controlling the electrode clamps, a wider and higher weld core was obtained. The depth of “penetration” into the sheet was greater. As a result, the welded joint has a higher resistance (by 30%). Technological welding tests for the new EFS system were carried out for a 25% lower welding current compared with PFS. Despite the lower welding current for EFS, the welding energy is slightly lower but the welding quality for EPS is significantly higher.

6 October 2020 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
Zygmunt MiknoZygmunt Mikno
Zygmunt Mikno
BGBogusław Grzesik
Bogusław Grzesik
MSMariusz Stępień
Mariusz Stępień
The paper presents investigation on the ideal spot weld numerical model. The weld discussed in the paper was made by the resistance spot welding of two overlapping steel sheets. The ideal weld contained three parts, i.e. two welded steel sheets and an intermediate component (connector) made of the same material. The connector was placed between the sheets, assembled mechanically and fixed. A numerical model of the ideal weld enables the elimination of all welding imperfections, including, among other things, an indent left by the electrode as well as stresses and deformations of materials present in the actual welded joint. The ideal weld was intentionally not subjected to the thermal cycle. As a result, the heat-affected zone and the molten nugget were eliminated from the model (welding area). Consequently, the entire tested (analysed) weld specimen only had the properties of the base material. The analysis presented in the paper is based on 3D FEM numerical modelling and experimental validation. The numerical model of the ideal weld (nugget surface) was investigated in relation to various shapes of the nugget (e.g. circular, square and rectangular) as well as in relation to different dimensions. The research also involved the performance of a comparative analysis including various welding conditions. The analysis was carried out to determine the highest possible value of shear force generated during a static tensile test. The results of the numerical tests were compared with the results of selected laboratory tests.

7 March 2019 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
Zygmunt MiknoZygmunt Mikno
Zygmunt Mikno
The article discusses the optimisation of the conventional resistance welding process performed using the pneumatic (electrode) force system (PFS) by applying the electromechanical force system (EFS) and a new algorithm enabling the control of the force and/or displacement of welding machine electrodes, particularly during the flow of current. The research work described in the article aimed at the in-depth numerical analysis of the projection cross-wire welding of bars made of aluminium alloy Al 5182, having a diameter of 4 mm, in relation to two electrode force systems, i.e. the PFS and the EFS. The research-related tests involved experimental verification. In addition, the article presents advantages of the new control system. Calculations were performed until one of the adopted boundary conditions, i.e. the maximum welding time, the maximum penetration of wires (bars), the occurrence of expulsion or the exceeding of the temperature limit in the contact between the electrode and the welded material was obtained. For the PFS, it was observed that the ring weld was formed within the entire range of welding parameters. Numerical calculations were performed using SORPAS software. Technological welding tests were performed using inverter welding machines (1 kHz) provided with various electrode force systems. The research also involved the performance of metallographic and strength (peeling) tests as well as measurements of welding process characteristic parameters (welding current and voltage). The welding process optimisation involving the use of the EFS and the application of the hybrid algorithm of force control resulted in (i) more favourable space distribution of welding power, (ii) energy concentration in the central zone of the weld, (iii) favourable (desired) melting of the material within the entire weld transcrystallisation zone, (iv) obtainment of a full weld nugget and (v) over 20% longer weld nugget diameter.

5 September 2018 in Thermal Science and Engineering
Verified
Journal Article
Open access
PDF file
Zygmunt MiknoZygmunt Mikno
Zygmunt Mikno
The cross wire projection welding of wires (Al 5182, =4 mm) performed using the conventional (i.e. pneumatic) electrode force system was subjected to thorough numerical analysis. Calculations were performed until one of adopted boundary conditions, i.e. maximum welding time, maximum penetration of wires, the occurrence of expulsion or the exceeding of the temperature limit in the contact between the electrode and the welded material was obtained. It was observed that the ring weld was formed within the entire range of welding parameters. The process of welding was subjected to optimisation through the application of a new electromechanical electrode force system and the use of a special hybrid algorithm of electrode force and/or displacement control. Comparative numerical calculations were performed (using SORPAS software) for both electrode force systems. Technological welding tests were performed using inverter welding machines (1 kHz) provided with various electrode force systems. The research also involved the performance of metallographic and strength (peeling) tests as well as measurements of welding process characteristic parameters (welding current and voltage).The welding process optimisation involving the use of the electromechanical force system and the application of the hybrid algorithm of force control resulted in i) more favourable space distribution of welding power, ii) energy concentration in the central zone of the weld, iii) favourable (desired) melting of the material within the entire weld transcrystallisation zone and iv) obtainment of a full weld nugget.

13 November 2020
Verified
Book Chapter
Open access
PDF file
Zygmunt MiknoZygmunt Mikno
Zygmunt Mikno
The idea presented in this chapter is an innovative welding machine electrode force system. The operation, advantages of the new solution and the optimisation of the welding process were illustrated by the welding of aluminium bars (5182) (ø 4 mm). The solution involves controlling the force and/or displacement of welding machine electrodes. The modulation of electrode force significantly improves welding, particularly as regards aluminium alloys (requiring a very short welding process). The tests involved the numerical analysis of two electrode force systems, i.e. a conventional Pneumatic Force System (PFS) and an Electromechanical (Servomechanical Force) System (EFS). The numerical tests were performed using SORPAS software. FEM calculation results were verified experimentally. The technological welding tests were conducted using inverter welding machines (1 kHz) equipped with various electrode force systems. The research included metallographic and strength (peeling) tests and measurements of characteristic parameters. The welding process optimisation based on the EFS and the hybrid algorithm of force control resulted in i) more favourable space distribution of welding power, ii) energy concentration in the central weld zone, iii) favourable melting of the material within the entire weld transcrystallisation zone, iv) obtainment of the full weld nugget and v) longer weld nugget diameter.