Rahulkumar Sunil Singh

Dr. Rahulkumar Sunil Singh

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2023 in AIP Advances
Verified
Journal Article
Open access
PDF file
RSRahulkumar Sunil Singh
Rahulkumar Sunil Singh
SGSivaraman Guruswamy
Sivaraman Guruswamy
In a disordered fcc structure, the equiatomic Fe–Ni alloy is of great interest as a soft magnetic Invar alloy with a near zero or low thermal expansion coefficient. In the L10 ordered phase, it is of interest as a potential high-performance permanent magnet alloy. In this work, the first detailed measurements of the elastic constants in a [001]-oriented Fe-50 at. % Ni alloy single crystal under a no magnetic field condition were made using the resonant ultrasound spectroscopy technique. The elastic constants measured allow one to understand the nature of atomic bonding in a material and the mechanical response to applied stress. The single crystal sample having a rectangular parallelepiped shape was prepared from a single crystal grown using the vertical Bridgman technique. The elastic constants C11, C12, and C44 were obtained from the resonant frequencies observed over a frequency range of 100–900 kHz. Using these C11, C12, and C44 values, Young’s modulus, shear modulus, bulk modulus, and Poisson’s ratio were calculated to be 99.1 GPa, 73.4 GPa, 176.7 GPa, and 0.20, respectively. The large anisotropy factor of 3.29 highlights the strong directional dependence of the material’s mechanical behavior.

13 March 2024 in Processes
Verified
Journal Article
Open access
PDF file
SPSUBBU VENKATA SATYASRI HARSHA PATHAPATI
SUBBU VENKATA SATYASRI HARSHA PATHAPATI
RSRahulkumar Sunil Singh
Rahulkumar Sunil Singh
Michael FreeMichael Free
Michael Free
Prashant K. SarswatPrashant K. Sarswat
Prashant K. Sarswat
Rare earth elements (REEs including Sc, Y) are critical minerals for developing sustainable energy sources. The gradual transition adopted in developed and developing countries to meet energy targets has propelled the need for REEs in addition to critical metals (CMs). The rise in demand which has propelled REEs into the spotlight is driven by the crucial role these REEs play in technologies that aim to reduce our carbon footprint in the atmosphere. Regarding decarbonized technologies in the energy sector, REEs are widely applied for use in NdFeB permanent magnets, which are crucial parts of wind turbines and motors of electric vehicles. The underlying motive behind exploring the energy and carbon footprint caused by REEs production is to provide a more complete context and rationale for REEs usage that is more holistic. Incorporating artificial intelligence (AI)/machine learning (ML) models with empirical approaches aids in flowsheet validation, and thus, it presents a vivid holistic picture. The energy needed for REEs production is linked with the source of REEs. The availability of REEs varies widely across the globe. REEs are either produced from ores with associated gangue or impurities. In contrast, in other scenarios, REEs can be produced from the waste of other mineral deposits or discarded REEs-based products. These variations in the source of feed materials, and the associated grade and mineral associations, vary the process flowsheet for each type of production. Thus, the ability to figure out energy outcomes from various scenarios, and a knowledge of energy requirements for the production and commercialization of multiple opportunities, is needed. However, this type of information concerning REEs production is not readily available as a standardized value for a particular material, according to its source and processing method. The related approach for deciding the energy and carbon footprint for different processing approaches and sources relies on the following three sub-processes: mining, beneficiation, and refining. Some sources require incorporating all three, whereas others need two or one, depending on resource availability. The available resources in the literature tend to focus on the life cycle assessment of REEs, using various sources, and they focus little on the energy footprint. For example, a few researchers have focused on the cumulative energy needed for REE production without making assessments of viability. Thus, this article aims to discuss the energy needs for each process, rather than on a specific flowsheet, to define process viability more effectively regarding energy need, availability, and the related carbon footprint.

1 April 2024 in AIP Advances
Verified
Journal Article
Open access
PDF file
RSRahulkumar Sunil Singh
Rahulkumar Sunil Singh
SGSivaraman Guruswamy
Sivaraman Guruswamy
An equiatomic Fe–Ni alloy in its disordered A1 structure is a soft magnetic alloy. On ordering to the L10 ordered phase, it shows significant magneto-crystalline anisotropy and a strong permanent magnet behavior and is of interest as a rare earth-free permanent magnet. However, synthesis of an L10 phase in a bulk form remains a challenge due to its low critical ordering temperature Tc and consequent extremely slow ordering kinetics. This phase is present in asteroids, and how it was formed remains unclear. The likely mechanism is enhanced diffusion kinetics due to extreme dislocation densities and vacancy concentrations produced by deformation during asteroid collisions and the presence of S. Prior to examining extreme deformation in an FeNi alloy comparable to that in asteroid collisions, low strain rate deformation behavior, magnetic properties, and the structure of undoped and S-doped [100]-oriented FeNi single crystals were carried out. Controlled deformation at a strain rate of 1 × 10−5/s showed the yield point to be 89 MPa, and the critical resolved shear stress was 25.7 MPa. The dislocation densities obtained were ∼1017/m2. The saturation magnetization value was ∼147–151 emu/g both before and after deformation, comparable to NdFeB magnets. Coercivity increased slightly from ∼0.04–0.4 to ∼5 Oe after deformation due to an increase in dislocation density. The x-ray diffraction scan of S-doped and deformed single crystals after annealing at 300 °C, just below Tc, showed no evidence of L10 order. These data serve as a baseline for extreme strain rate deformation where much higher dislocation densities and vacancy concentrations can be obtained to facilitate L10 order.

7 February 2023
Verified
Book Chapter
Closed access
PDF file
RSRahulkumar Sunil Singh
Rahulkumar Sunil Singh
EGEddie Bryan Gilcrease
Eddie Bryan Gilcrease
RGRamesh Goel
Ramesh Goel
MFMichael L. Free
Michael L. Free
PSPrashant K. Sarswat
Prashant K. Sarswat

1 August 2026 in AIP Advances
Verified
Journal Article
Open access
RSRahulkumar Sunil Singh
Rahulkumar Sunil Singh
SPSUBBU VENKATA SATYASRI HARSHA PATHAPATI
SUBBU VENKATA SATYASRI HARSHA PATHAPATI
SGSivaraman Guruswamy
Sivaraman Guruswamy
The influence of crystallographic orientation on the mechanical behavior of equiatomic Fe–Ni single crystal is examined through nanoindentation. Single crystals were grown using vertical Bridgman technique. Single crystal samples with different orientations were cut from this crystal and the desired faces were polished down to smoothness levels of less than 3 nm. Nanoindentation experiments were carried out on single crystal FeNi alloy samples with [100], [110], and [111] orientations, with peak forces ranging from 500 to 10 000 μN. Hardness values obtained at the highest peak load of 10 000 μN were 2.03 ± 0.02, 2.47 ± 0.04, and 1.97 ± 0.03 GPa for the (100), (110), and (111) faces, respectively. The reduced modulus obtained for peak load of 10 000 μN were 177.91 ± 1.67, 161.69 ± 1.88, and 189.47 ± 1.73 GPa for the (100), (110), and (111) faces, respectively.

24 September 2026 in Inventions
Verified
Journal Article
Open access
PDF file
Prashant K. SarswatPrashant K. Sarswat
Prashant K. Sarswat
RSRahulkumar Sunil Singh
Rahulkumar Sunil Singh
Michael FreeMichael Free
Michael Free
GKGagan Kumar
Gagan Kumar
The Berry phase plays a central role in modern electronics and acts as a foundation for a wide range of phenomena, from the anomalous Hall effect to topological insulators and valleytronics. However, in conventional analytical treatments, its geometric origin frequently stays abstract and unreachable. A thorough paradigm for computational visualization that clarifies the emergence and implications of the Berry phase in quantum electronic systems is presented in this paper. The simulation begins with a spin-½ model in a rotating magnetic field and uses real-time spin precession and field rotation tracking to demonstrate geometric phase accumulation on the Bloch sphere. Key ideas for comprehending tunable topological devices are revealed by the dynamic redistribution of Berry curvature and associated Berry-flux evolution when the framework is further extended to time-dependent Hamiltonians that reflect oscillating fields or shifting mass terms. Users can see local spin textures and phase progression within the Brillouin zone by mapping each k-point in momentum-space modules to a small Bloch sphere. Topology is linked to quantifiable device phenomena by a hybrid real- and momentum-space animation that links geometric phase evolution with observable transport behavior such as quantized Hall responses and Landau orbits. Together, these interconnected modules provide an interactive framework for exploring Berry-phase-related geometric and transport phenomena across complementary quantum-mechanical representations. Finally, these visualizations form an interactive and pedagogically rich toolset that unites geometric quantum theory with practical implications for next-generation electronic and spintronic devices.