Grey cast iron brake discs with lamellar graphite (GJL) offer excellent strength and thermal conductivity but are prone to wear and dust emissions. To mitigate these issues, a multilayer coating was applied via Laser Metal Deposition (LMD), comprising a 316L stainless steel base layer and a WC-reinforced top layer. This study examines the microstructural evolution of the coatings under simulated thermomechanical and corrosive conditions using a brake shock corrosion test. Microstructural characterization was performed via Scanning Electron Microscopy (SEM) and Electron Backscatter Diffraction (EBSD), focusing on grain size, orientation, and texture before and after testing. EBSD analysis revealed significant grain coarsening, with sizes increasing from below 20 µm to 30–60 µm, and a shift toward texture. Hardness measurements showed a reduction in the WC-reinforced layer from 478 HV to 432 HV and in the 316L base layer from 232 HV to 223 HV, confirming the influence of thermomechanical stress. SEM analysis revealed a transition from horizontal cracks—caused by residual stress during LMD—to vertical microcracks propagating from the substrate, activated by braking-induced loads. These findings provide insights into the microstructural response of LMD coatings under realistic service conditions and underscore the importance of grain boundary control in designing durable brake disc systems.
Brake discs made of grey cast iron with lamellar graphite (GJL) offer an excellent combination of strength and thermal conductivity, which is essential for the high demands on braking performance and durability in the automotive industry. However, the resulting dust emissions are a disadvantage that can be mitigated by applying a wear‐resistant coating on the brake disc using the Laser Metal Deposition (LMD) process. In this study, the influence of the braking force on the microstructure of the coated brake disc in a corrosive environment was investigated. The surface of grey cast iron brake discs was functionalized with 316L stainless steel, which was partially reinforced with tungsten carbide particles using the LMD process.The main objective is to improve the wear and corrosion resistance of brake discs under operating conditions. The samples were subjected to a brake shock corrosion test, which simulates real thermal and mechanical loads. Microstructural analysis was performed using Scanning Electron Microscopy (SEM) and Electron Backscatter Diffraction (EBSD) to evaluate microstructural features such as grain size, grain orientation and phase distribution before and after the brake shock corrosion test. The study highlights the critical importance of understanding thermal effects and microstructural changes to optimize brake performance and ensure safety.The most important results include the promotion of grain growth, crystal reorientation and texture changes through thermal and mechanical alternating stress as well as the improvement of wear resistance through the incorporation of tungsten carbide particles in stainless steel.
29 December 2025 in The International Journal of Advanced Manufacturing Technology
In the present study commercially available AlSi10Mg and SiC powders were mixed in a tumble mixer with resulting compositions of 5, 15 and 25 vol% SiC and processed using laser powder bed fusion. Different process parameters were used to manufacture samples which were characterized by various properties, such as porosity, microstructure and occurring phases to evaluate the manufacturability of the powder mixtures. The samples showed increasing porosity with lowered volumetric energy density and increasing SiC content. Relative densities of about 93.0% (25 vol% SiC), 94.5% (15 vol% SiC) and 98.5% (5 vol% SiC) respectively could be achieved. In addition, the correlation between the used energy density and the retained SiC particles in the samples was investigated. The quantity of retained SiC particles correlates negatively with the achievable density for all compositions, making compromises between these two properties necessary depending on the desired application. It is shown that SiC can get dissolved due to the high absorption of the laser energy resulting in the formation of primary silicon crystals as well as Al 4 C 3 and Al 4 SiC 4 phases. Microstructure characterizations using AFM revealed the influence of the SiC fraction on the eutectic structure and the formation of the new phases. Finally, EDS and TOF-SIMS analysis showed that the formed Al 4 C 3 phase can react with the humidity of ambient air at the surface, leading to localized cracks due to AlOOH formation.
Grey cast iron brake discs remain standard in automotive braking systems due to their favorable thermal conductivity and mechanical strength. However, increasingly stringent environmental regulations, including Euro 7, necessitate enhanced surface durability to reduce particulate emissions and mitigate corrosion‑related degradation. In this context, Laser Metal Deposition (LMD) offers a promising route to engineer wear‑resistant coating systems with tailored microstructures. This study investigates phase formation and microstructural evolution in a 316L/430L‑WC multilayer coating deposited on grey cast iron (GJL) brake discs and subjected to brake‑shock testing to replicate thermomechanical load cycles representative of real braking conditions. X‑ray diffraction (XRD) performed on the interlayer region between the 316L and 430L‑WC layers revealed clear evidence of σ‑phase formation, indicating intermetallic transformations facilitated by thermal cycling. Microstructural characterization using scanning electron microscopy (SEM) and energy‑dispersive spectroscopy (EDS) identified localized enrichment of Cr‑ and Fe‑rich regions that support the XRD‑based interpretation of σ‑phase development. These results provide insights into phase transformations and elemental diffusion in LMD‑fabricated brake‑disc coatings. The findings advance the understanding of thermally induced transformations in multilayer steel systems and support the optimization of LMD coatings for high‑temperature and wear‑intensive applications through advanced analytical evaluation.
Grey cast iron brake discs remain standard in automotive braking systems due to their favourable thermal conductivity and mechanical strength. However, increasingly stringent environmental regulations, including Euro 7, necessitate enhanced surface durability to reduce particulate emissions and mitigate corrosion-related degradation. In this context, laser metal deposition (LMD) offers a promising route to engineer wear-resistant coating systems with tailored microstructures. This study investigates phase formation and microstructural evolution in a 316L/430L-WC multilayer coating deposited on grey cast iron (GJL) brake discs and subjected to brake-shock testing to replicate thermomechanical load cycles representative of real braking conditions. X-ray diffraction (XRD) performed on the interlayer region between the 316L and 430L-WC layers revealed clear evidence of σ-phase formation, indicating intermetallic transformations facilitated by thermal cycling. Microstructural characterization using scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) identified localized enrichment of Cr- and Fe-rich regions that support the XRD-based interpretation of σ-phase development. These results provide insights into phase transformations and elemental diffusion in LMD-fabricated brake-disc coatings. The findings advance the understanding of thermally induced transformations in multilayer steel systems and support the optimization of LMD coatings for high-temperature and wear-intensive applications through advanced analytical evaluation.