Metal bellows feature a simple structure, high-temperature resistance, corrosion resistance, and strong flexibility for compensation, making them widely used in the aerospace, machinery, and petrochemical industries. Compared to multilayer bellows, single-layer bellows are simpler in structure and forming process, making the performance easier to achieve. The structural parameters of multilayer metal bellows, particularly the number of layers, significantly impact the performance. This study focuses on multilayer U-shaped metal bellows made of 304 stainless steel. Using ABAQUS finite element software, a full simulation of the hydroforming and performance analysis of multilayer U-shaped metal bellows is conducted. This study examines the effects of wall thickness thinning and residual stress distribution caused by hydroforming and explores how structural parameters (including outer diameter, corrugation height, corrugation spacing, and wall thickness) influence axial stiffness and bending performance. The findings provide valuable insights for the design and selection of metal bellows.
Straightness is one of the important indices to measure the quality of bars; multi-roll straightening is an essential process in bar production. Materials undergo multiple cycles of alternating tensile and compressive loading during multi-roll straightening, subject to the influence of the Bauschinger effect. However, most existing studies have failed to adequately account for the Bauschinger effect, leading to insufficient prediction accuracy of the process. This study establishes an eleven-roll straightening finite element model (FEM) for bars based on the nonlinear combined hardening model. The orthogonal experimental design method is employed to optimize the process parameters. Straightening experiments of 20CrMnTi bars using an eleven-roll straightener were conducted. Based on the FEM, the influence patterns of different process parameters on the straightening results were investigated. The results indicate excellent agreement between the eleven-roll straightening finite element simulation results and the experimental results. Using the optimized parameters, both the simulated and experimental straightness after straightening were within 1‰, with a relative error between them below 8%. The findings of this study can improve the prediction accuracy of the eleven-roll bar straightening process and provide reliable theoretical support and technical reference for the optimization of straightening process parameters.
16 April 2026 in The International Journal of Advanced Manufacturing Technology