The parts formed by the bending process not only have high precision of appearance dimension but also have good performance. In recent years, enterprises have put forward higher requirements for the forming process and product quality. Therefore, a new method for iterative compensation of bending springback with certain generality is proposed for continuous curvature bending. The purpose of this study is to take curvature as an iterative parameter and make the shape size reach the expected value through the finite compensation. On the basis of establishing this iterative compensation mechanism, the convergence of curvature iteration in the general free bending process is proved. The reliability of the proposed iterative compensation method in the bending process engineering application is verified by combining simulation with experiment. The two materials of 304 stainless steel and ST12 cold rolled steel were studied, and the two-dimensional plane stress-strain model Abaqus cantilever beam was established by using finite element software. The bending forming simulation was carried out based on the above iterative compensation mechanism. Finally, through the bending experiments of four models, the feasibility of the iterative compensation mechanism of curvature in the continuous curvature plane bending process is verified, and different models are selected to clarify that the method has the characteristics of generality, that is, it will greatly improve the flexibility of the bending process in industrial applications without the limitation of material types and mechanical models.
Roll-bending technology has a high degree of flexibility and does not require special molds. However, based on the existing plastic mechanics theory and finite element simulation, it is difficult to accurately analyze the complex spatial relationship of profile roll forming. Therefore, a fixed-curvature prediction model is constructed based on XGBoost (extreme gradient boosting), and the coupling effect of the process parameters and material performance parameters on the roll-forming process is explored. Combined with a Bayesian optimization algorithm, the hyperparameters of the fixed-curvature prediction model are optimized. In addition, based on the prediction result of the fixed curvature, a variable-curvature prediction model is established using the conditional random field (CRF). To further improve the prediction accuracy, an error compensation network is added after the result of the CRF in order to map the discrete sequence to the continuous sequence. The experimental results show that the mean square error (MSE), mean absolute error (MAE), and mean absolute percentage error (MAPE) predicted by the models above are much smaller than other methods, which verifies the superiority of the prediction models.
Metal bellows feature a simple structure, high-temperature resistance, corrosion resistance, and strong flexibility for compensation, making them widely used in the aerospace, machinery, and petrochemical industries. Compared to multilayer bellows, single-layer bellows are simpler in structure and forming process, making the performance easier to achieve. The structural parameters of multilayer metal bellows, particularly the number of layers, significantly impact the performance. This study focuses on multilayer U-shaped metal bellows made of 304 stainless steel. Using ABAQUS finite element software, a full simulation of the hydroforming and performance analysis of multilayer U-shaped metal bellows is conducted. This study examines the effects of wall thickness thinning and residual stress distribution caused by hydroforming and explores how structural parameters (including outer diameter, corrugation height, corrugation spacing, and wall thickness) influence axial stiffness and bending performance. The findings provide valuable insights for the design and selection of metal bellows.