In the practical application of high-temperature superconducting (HTS) maglev, the influence of ambient temperature on its performance is mainly reflected in the change of magnetic characteristics of permanent magnet guideway (PMG). In order to investigate the magnetic characteristics of PMG at high temperature and its influence on the levitation performance of HTS bulk above, the magnetic characteristics of three kinds of PMG and six kinds of single permanent magnet (PM) in the temperature range from room temperature to 85 °C were studied in this paper. Furthermore, the effect of this variation on the levitation performance of HTS bulk under zero-field-cooling condition was investigated by experiment and simulation. The results show that the NSSN-type PMG-H has better magnetic field stability than the Halbach PMG-I and the NNSS-type PMG-J at high temperature. The levitation force of HTS bulks decreases with the increase of the PMG temperature. The variation range of levitation force is larger than that of magnetic field of permanent magnet, but absolute values under 55 °C are small. This work provides a reference for the engineering PMG optimization of HTS Maglev.
The suspension system of the Electromagnetic Suspension (EMS) maglev train is crucial for ensuring safe operation. This article focuses on data-driven modeling and control optimization of the suspension system. By the Extended Dynamic Mode Decomposition (EDMD) method based on the Koopman theory, the state and input data of the suspension system are collected to construct a high-dimensional linearized model of the system without detailed parameters of the system, preserving the nonlinear characteristics. With the data-driven model, the LQR controller and Extended State Observer (ESO) are applied to optimize the suspension control. Compared with baseline feedback methods, the optimization control with data-driven modeling reduces the maximum system fluctuation by 75.0% in total. Furthermore, considering the high-speed operating environment and vertical dynamic response of the maglev train, a rolling-update modeling method is proposed to achieve online modeling optimization of the suspension system. The simulation results show that this method reduces the maximum fluctuation amplitude of the suspension system by 40.0% and the vibration acceleration of the vehicle body by 46.8%, achieving significant optimization of the suspension control.
4 August 2025 in IEEE Transactions on Vehicular Technology
The absence of 600 km/h operational high-speed Maglev lines leads to a unavailability of empirical track irregularity data at this speed, challenging accurate assessment of the system's dynamic response. This study presents a framework for track irregularity estimation suitable for 600 km/h applications, integrating measured data at 430 km/h and dynamic simulation outputs from a vehicle-magnetic force-track coupling model. By implementing filters and wavelet signal decomposition, the effective wavelength of track irregularity spectrum is extended to 1 m-200 m, optimizing its suitability for dynamic calculation at high-speed operation. Additionally, the autoregressive (AR) spectral estimation is employed to preserve characteristic frequencies of high-speed Maglev systems while enhancing the resolution of the irregularity spectrum. Finally, the obtained track irregularity spectrum is numerically inverted and applied into the dynamic coupling model for 500 sets of dynamic simulation analysis. The results show that the dynamic response of the 600 km/h Maglev system under the irregularity proposed in this study is greater than that under the irregularity proposed in existing research and 430 km/h measured irregularity. The track irregularity obtained in this study is more accurate and appropriate for evaluating the dynamic characteristics of 600 km/h Maglev systems. The stochastic results show there is a probability of 0.04% that the stability index of the car body surpasses the threshold of 2.5, while the minimum levitation gap of individual points exceeding the permissible range of $\pm$4 mm.
21 June 2021 in IEEE Transactions on Applied Superconductivity
A new HTS maglev vehicle called “KENYON” that can carry 8 passengers was successfully developed in December 2019. The vehicle adopted the bogie structure of independent running gear, which brings the improvement of curve passing performance. In order to further optimize vehicle curve passing performance in view of the small radius curve of the ring test line, corresponding experimental research was carried out in this paper. The experimental results show that the small wheelbase and centripetal arrangement were beneficial to improve the vehicle's curve passing ability.
1 September 2019 in Journal of Physics: Conference Series
Today the high-speed and high-performance systems are each more important for many areas like industry and transport system. The magnetic levitation system can be used to improve the performance. For superconducting levitation, it is important to know the behavior of levitation force. However, its behavior is not completely known and studies about it are necessary. This work presented a description of the test bench and a brief introduction to the new software developed to the magnetic levitation measurement system (SCML-02). The system tested is compound by a superconducting bulk and permanent magnet. This system makes data acquisitions using the load cells and the data processing is built by the new software developed in the LabVIEW. The results are verified and compared by simulations which were done in the software of finite elements and measurement data of the magnetic levitation done at Federal University of Rio de Janeiro - UFRJ. The measurements of the new system show compatible results with the simulations and the measurement data done at UFRJ. Therefore, with this new software, the users can easily to do magnetic levitation measurements through an interface easy to understand.
1 January 2026 in IEEE Transactions on Intelligent Transportation Systems