Large components are crucial in modern industrial applications, especially for internal gap monitoring and specific assembly methods. This paper examines the assembly of hydroelectric generator rotors and stators, introducing a spatial relative position monitoring system using multiple sensors. A dedicated position monitoring program is designed, and error sources within the system are thoroughly explored. Detailed error analysis and modeling reveal that verticality and angular errors significantly impact monitoring accuracy. To address this, two error control methods are proposed to effectively mitigate these issues, ensuring precise assembly of large components.
Addressing the need for contact load detection in wind turbine main bearings during service, a roller contact load measurement method is proposed. An analytical model characterizes the contact load-to-inner bore strain mapping relationship. To overcome the inherent low sensitivity of direct bore strain measurement, bore-to-measurement-point sensitivity analysis was optimized. Multiple structurally optimized sensor brackets were designed to enhance strain measurement sensitivity, and their performance was comparatively evaluated via simulation. To mitigate sensitivity fluctuations caused by roller rotation phase variations, a strain–phase–load calculation method incorporating real-time phase compensation was developed and verified through simulation analysis. A dedicated roller contact load testing system was constructed and experimental validation was conducted. Results demonstrate 95% accuracy in contact load acquisition. This method accurately obtains roller contact loads in wind turbine main bearings, proving crucial for studying bearing mechanical behavior, predicting fatigue life, optimizing structural design, and enhancing reliability.