We demonstrate that a broadband terahertz absorber with near-unity absorption can be realized using a net-shaped periodically sinusoidally-patterned graphene sheet, placed on a dielectric spacer supported on a metallic reflecting plate. Because of the gradient width modulation of the unit graphene sheet, continuous plasmon resonances can be excited, and therefore broadband terahertz absorption can be achieved. The results show that the absorber’s normalized bandwidth of 90% terahertz absorbance is over 65% under normal incidence for both TE and TM polarizations when the graphene chemical potential is set as 0.7 eV. And the broadband absorption is insensitive to the incident angles and the polarizations. The peak absorbance remains more than 70% over a wide range of the incident angles up to 60° for both polarizations. Furthermore, this absorber also has the advantage of flexible tunability via electrostatic doping of graphene sheet, which peak absorbance can be continuously tuned from 14% to 100% by controlling the chemical potential from 0 eV to 0.8 eV. The design scheme is scalable to develop various graphene-based tunable broadband absorbers at other terahertz, infrared, and visible frequencies, which may have promising applications in sensing, detecting, and optoelectronic devices.

In this paper, we propose and demonstrate a switchable terahertz metamaterial absorber with broadband and multi-band absorption based on a simple configuration of graphene and vanadium dioxide (VO₂). The switchable functional characteristics of the absorber can be achieved by changing the phase transition property of VO₂. When VO₂ is insulating, the device acts as a broadband absorber with absorbance greater than 90% under normal incidence from 1.06 THz to 2.58 THz. The broadband absorber exhibits excellent absorption performance under a wide range of incident and polarization angles for TE and TM polarizations. Moreover, the absorption bandwidth and intensity of the absorber can be dynamically adjusted by changing the Fermi energy level of graphene. When VO₂ is in the conducting state, the designed metamaterial device acts as a multi-band absorber with absorption frequencies at 1 THz, 2.45 THz, and 2.82 THz. The multi-band absorption is achieved owing to the fundamental resonant modes of the graphene ring sheet, VO₂ hollow ring patch, and coupling interaction between them. Moreover, the multi-band absorber is insensitive to polarization and incident angles for TE and TM polarizations, and the three resonance frequencies can be reconfigured by changing the Fermi energy level of graphene. Our designed device exhibits the merits of bi-functionality and a simple configuration, which is very attractive for potential terahertz applications such as intelligent attenuators, reflectors, and spatial modulators.

We propose and numerically demonstrate high Q‐factor sensors based on all‐dielectric metasurfaces, which are very sensitive to the change of the refractive index of the surrounding media and the incident angle. By using the light incident angular scanning method, the all‐dielectric metasurface based on symmetric tetramer can act as an excellent sensing platform for trace‐amount molecules such as protein A/G, 2, 4‐DNT, and 2D material graphene with huge absorbance enhancement in the mid‐infrared broadband spectrums. The results reveal that envelope of absorbance amplitudes is in good agreement with the vibrational mode of molecules, and absorbance enhancement factors reach as high as 10 dB in the mid‐infrared wavelength range from 5.75 to 6.80 μm. To further increase the Q‐factor of the resonances, the all‐dielectric metasurface based on asymmetric tetramer is investigated. This asymmetric structure can induce toroidal and magnetic dipoles governed by quasi‐BIC to produce multi‐extremely narrow linewidth Fano resonances, and the maximum sensitivity reaches up to 1.43 μm/RIU. Therefore, the proposed all‐dielectric metasurface demonstrates highly enhanced performance in refractive index and chemical information sensing for trace‐amount biomolecules, which inspires the development of new high‐sensitivity refractive index sensors for the nondestructive identification in the mid‐infrared regime.

In this paper, a graphene-based hybrid plasmonic waveguide is proposed for highly efficient broadband surface plasmon polariton (SPP) propagation and modulation at mid-infrared (mid-IR) spectrum. The hybrid plasmonic waveguide is composed of a monolayer graphene sheet in the center, a polysilicon gating layer, and two inner dielectric buffer layers and two outer parabolic-ridged silicon substrates symmetrically placed on both sides of the graphene. Owing to the unique parabolic-ridged waveguide structure, the light-graphene interaction and subwavelength SPPs confinement of the fundamental SPP mode for the hybrid waveguide can be significantly increased. Under the graphene chemical potential of 1.0 eV, the proposed waveguide can achieve outstanding SPP propagation performance with long propagation length of 12.1-16.7 μm and small normalized mode area of ~10⁻⁴ in the frequency range of 10-20 THz, exhibiting more than one order smaller in the normalized mode area while remaining the propagation length almost the same level with respect to the hybrid plasmonic waveguide without parabolic ridges. By tuning the graphene chemical potential from 0.1 to 1.0 eV, we demonstrate the waveguide has a modulation depth greater than 51% for the frequency ranging from 10 to 20 THz and reaches a maximum of nearly 100% at the frequency higher than 18 THz. Benefitting from the excellent broadband mid-IR propagation and modulation performance, the graphene-based hybrid plasmonic waveguide may open up a new way for various mid-IR waveguides, modulators, interconnects and optoelectronic devices.

We demonstrate an efficient back-fire to forward wide-angle beam steering leaky-wave antenna (LWA) based on a large dispersion gradient planar spoof surface plasmon polariton (SSPP) transmission line (TL) with split-ring units. To convert the highly confined SSPP waveguiding mode to a radiation mode, two arrays of metallic patches are periodically arranged on both sides of the SSPP TL. The patches are designed as two combined half-elliptical shapes to mitigate the open stopband effect and enhance the radiation performance. We propose a theoretical method to interpret the mechanism and predict the directional pattern of the LWA. To verify the proposed method, the SSPP TL and LWA prototypes are fabricated and measured. The calculation, simulation, and experimental results match well and show that the main beam of the LWA can steer a wide range of 112° from back-fire (−90°) to the forward quadrant of 22° passing through the broadside in 6.3–11 GHz, demonstrating a large scanning rate of 2.07°/%. Furthermore, the LWA also possesses the advantages of low profile, high average gain (12 dBi), high average efficiency (95%), and low sidelobe level (<−13 dB). This work provides an alternative route to achieving wide-angle LWAs for promising microwave radar and wireless communication applications.