With the application of tracked mobile robots in detection and rescue, how to improve their stability and trafficability has become the research focus. In order to improve the driving ability and trafficability of tracked mobile robots in rugged terrain, this paper proposes a new type of tracked mobile robot using passive suspension. By adding a connecting rod differential mechanism between the left and right track mechanisms, the contact stability between the track and terrain is enhanced. The kinematics model and attitude relationship of the suspension are analyzed and established, and the rationality of the passive suspension scheme is verified by dynamic simulation. The simulation results show that the tracked robot with passive suspension shows good obstacle surmounting performance, but there will be a heading deflection problem. Therefore, a track drive speed of the driving state compensation control is proposed based on the driving scene, which can effectively solve the problem of slip and heading deflection. Through the field test of the robot prototype, the effectiveness of the suspension scheme and control system is verified, which provides a useful reference for the scheme design and performance improvement of the tracked mobile robot in complex field scenes.
In order to explore the influence of wheel surface structure on the trafficability of planetary rovers on soft ground, three kinds of wheels with different rigid wheel surface structures were selected for research. The basic performance parameters of the wheel on simulated planetary soil are measured and tested to explore the law of the wheel’s sinkage, slip rate and traction coefficient. The results show that the wheel grouser increases the sinkage and slip rate of the wheel. The tread reduces the sinkage of the wheel, but it also reduces the traction performance of the wheel at a higher slip rate. Considering the complex working conditions of the planetary rover on the soft ground, the six-wheeled three-rocker-arm planetary rover is used to carry out passability tests in three terrains: obstacle crossing, out of sinkage and climbing. The results show that the grousers can cause disturbance and damage to the soft soil and have significant passing advantages. There may also be a slip phenomenon when crossing the obstacle, but it does not affect passing. The completely closed tread structure will cause soil accumulation between the tread and the grouser, affecting the wheel’s ability to escape sinkage. This study provides a reference for the design of a rigid wheel surface structure for planetary rovers from the perspective of passing performance.
Wheel failure is one of the worst problems for a planetary rover working on Mars or the Moon, which may lead to the interruption of the exploration mission and even the loss of mobility. In this study, a driving test of a planetary rover prototype with a faulty drive wheel was conducted, and state analysis and dynamics modeling were carried out. The drag motion relationship between the faulty drive wheel and the normal wheels on the same suspension was established based on the targeted single wheel test (faulty wheel-soil bin). In order to maintain the subsequent basic detection capability of the planetary rover, an emergency control system is proposed that integrates the path planning strategy with faulty wheel priority and the motion control method of correcting heading and coordinating allocation. The experimental results and emergency strategies of this study on simulating Martian soil and terrain can provide researchers with ideas to solve such problems.