This paper considers the features of determining the total tin content in waters with different salinity. Direct ICP-spectrometric analysis of sea waters with a salinity of more than 6‰ significantly reduced the analytical signal of tin by 70% (ICP-MS) and 30% (ICP-OES). The matrix effect of macrocomponents was eliminated by generating hydrides using 0.50 M sodium borohydride and 0.10 M hydrochloric acid. The effect of transition metals on the formation of tin hydrides was eliminated by applying L-cysteine at a concentration of 0.75 g/L. The total analyte concentrations, considering the content of organotin compounds, were determined after microwave digestion of sample with oxidizing mixtures based on nitric acid. The generation of hydrides with the ICP-spectrometric determination of tin leveled the influence of the sea water matrix and reduced its detection limit from 0.50 up to 0.05 µg/L for all digestion schemes. The developed analysis scheme made it possible to determine the total content of inorganic and organic forms of tin in sea waters. The total content of tin was determined in the waters of the Azov and Black seas at the levels of 0.17 and 0.24 µg/L, respectively.
In this study, determination of the inorganic and organic forms of tin in waters of different salinities is considered. The possibility of the separation of speciations of tin using liquid–liquid extraction (LLE); precipitation with fluorides, iodides, ammonia, and iron (III) chloride; and sorption of organotin compounds (OTCs) was studied. The LLE and analyte precipitation methods proved to be ineffective. Inorganic and organic forms of tin were separated by the sorption of OTCs using silica gel sorbent Diapak C18. Under optimized conditions, a technique for the separate determination of the forms of tin in natural waters was developed. The technique combines hydride generation and microwave mineralization of solutions followed by ICP spectrometry. The inorganic forms of tin were determined after their solid-phase separation from organotin compounds. The lower limits of analyte quantification were 0.03 μg/L (ICP-MS) and 0.05 μg/L (ICP-OES), which provide separate determinations of inorganic and organic forms of tin in waters with different salinities. The content of OTCs in water was determined by subtracting the inorganic concentration from the total concentration of tin. The technique will allow a comprehensive assessment of the toxicological impact of tin speciations on the aquatic ecosystem.