The global reserve of antimony is gradually declining while its demand continuously grows, rendering antimony an increasingly scarce metal. Antimony has been highlighted as a critical raw material in the EU owing to its economic significance and high supply risk. Due to the dispersed uses and low antimony concentration of the main antimony end-use, i.e. flame retardant in plastics, little antimony has been recovered from waste plastics to date. Many countries will have to rely on recovering antimony from refractory ores and metallurgical residues. For the purpose of efficient and selective antimony recovery with minimal economic cost and environmental impact, researchers proposed various innovative pyrometallurgical, hydrometallurgical, and electrochemical processes. This paper reviews the state-of-the-art technologies for the antimony separation and recovery from refractory ores and metallurgical residues. The advantages and limitations of these technologies are discussed with respect to antimony recovery efficiency and the impurity level of the products. Furthermore, future perspectives regarding technological trends and industrial applications are discussed.
A pyro-hydrometallurgical process is proposed in this study for the selective arsenic removal and the Pb and Sb recovery from lead softening slag, which incorporates NaOH roasting followed by water leaching, carbothermic reduction, and HNO3 leaching as process steps. Lead softening slag, containing 63.9 wt% Pb, 17.7 wt% Sb, and 4.4 wt% As, is first roasted with NaOH at 400°C, followed by water leaching at room temperature. The effect of the roasting temperature and NaOH dosage is investigated with regard to the removal yield of As, Pb, and Sb. The arsenic-free slag is reduced with carbon for Pb recovery as the antimonial lead. The reduction temperature and carbon dosage are optimized by applying FactSage modeling and performing experimental tests for selective Pb recovery. The residual slag is leached with HNO3 solution for the further removal of Pb and enrichment of Sb. The chemical and phase composition of the final leaching residue is determined to assess the possibility of using it as a feedstock for antimony trioxide production. The proposed process flowsheet enables the recovery of Pb and Sb as antimonial lead and antimony trioxide, respectively.
Pyrometallurgical recycling of lithium-ion batteries presents distinct advantages including streamlined processing, simplified pretreatment requirements, and high throughput capacity. However, its industrial implementation faces challenges associated with high energy demands and lithium loss into slag phases. This investigation develops an integrated reduction smelting–chloridizing volatilization process for the comprehensive recovery of strategic metals (Li, Mn, Cu, Co, Ni) from spent ternary lithium-ion batteries; calcium chloride was selected as the chlorinating agent for this purpose. Thermodynamic analysis was performed to understand the phase evolution during reduction smelting and to design an appropriate slag composition. Preliminary experiments compared carbon and aluminum powder as reducing agents to identify optimal operational parameters: a smelting temperature of 1450 °C, 2.5 times theoretical CaCl2 dosage, and duration of 120 min. The process achieved effective element partitioning with lithium and manganese volatilizing as chloride species, while transition metals (Cu, Ni, Co) were concentrated into an alloy phase. Process validation in an induction furnace with N2-O2 top blowing demonstrated enhanced recovery efficiency through optimized oxygen supplementation (four times the theoretical oxygen requirement). The recovery rates of Li, Mn, Cu, Co, and Ni reached 94.1%, 93.5%, 97.6%, 94.4%, and 96.4%, respectively. This synergistic approach establishes an energy-efficient pathway for simultaneous multi-metal recovery, demonstrating industrial viability for large-scale lithium-ion battery recycling through minimized processing steps and maximized resource utilization.