Recent years have witnessed significant progress in quantum communication and quantum internet with the emerging quantum photonic chips, whose characteristics of scalability, stability, and low cost, flourish and open up new possibilities in miniaturized footprints. Here, we provide an overview of the advances in quantum photonic chips for quantum communication, beginning with a summary of the prevalent photonic integrated fabrication platforms and key components for integrated quantum communication systems. We then discuss a range of quantum communication applications, such as quantum key distribution and quantum teleportation. Finally, the review culminates with a perspective on challenges towards high-performance chip-based quantum communication, as well as a glimpse into future opportunities for integrated quantum networks.

Single chip integrated spectrometers are critical to bring chemical and biological sensing, spectroscopy, and spectral imaging into robust, compact and cost-effective devices. Existing on-chip spectrometer approaches fail to realize both high resolution and broad band. Here we demonstrate a microring resonator-assisted Fourier-transform (RAFT) spectrometer, which is realized using a tunable Mach-Zehnder interferometer (MZI) cascaded with a tunable microring resonator (MRR) to enhance the resolution, integrated with a photodetector onto a single chip. The MRR boosts the resolution to 0.47 nm, far beyond the Rayleigh criterion of the tunable MZI-based Fourier-transform spectrometer. A single channel achieves large bandwidth of ~ 90 nm with low power consumption (35 mW for MRR and 1.8 W for MZI) at the expense of degraded signal-to-noise ratio due to time-multiplexing. Integrating a RAFT element array is envisaged to dramatically extend the bandwidth for spectral analytical applications such as chemical and biological sensing, spectroscopy, image spectrometry, etc.

A nanoelectromechanical systems (NEMS) optical switch driven by optical gradient force is demonstrated. The switch consists of a free-standing ring resonator and two bus waveguides. When the free-standing ring is bended by the optical gradient force, the output transmission signal is tuned from the on-state to the off-state of the switch. The NEMS optical switch shows a switching time of 43.5 ns and a switching contrast of more than 25 dB. With its chip-scale integrability, the optical switch has potential applications in signal processing and high-speed optical communication networks.

Miniaturized tunable lasers are important as light sources in optical networks and sensing systems. However, challenges remain in realizing a low-cost on-chip tunable laser with high tuning accuracy and wide tuning range. Here, an external-cavity tunable laser integrated by using a pair of coupled-ring resonators as a reflector onto a single silicon chip is designed and demonstrated. The silicon coupled-ring reflector provides simultaneous tuning of the central reflective wavelength and the free spectral range of the entire cavity to guarantee phase matching. The effective optical length of the coupled-ring reflector is controlled by the complementary thermo-optic and free-carrier dispersion effects, thus enabling high-resolution wavelength fine-tuning while maintaining wide wavelength tuning range. Experimentally, the tunable laser has high external-cavity efficiency (22%) and high wavelength tuning accuracy (2 pm) throughout the 41.6 nm tuning range. Potential applications of the external-cavity tunable laser include optical networks, optical sensing, and on-chip optoelectronic systems.

In this paper, an opto-mechanical coupled-ring reflector driven by optical gradient force is applied in an external-cavity tunable laser. A pair of mutually coupled ring resonators with a free-standing arc serves as a movable reflector. It obtains a 13.3-nm wavelength tuning range based on an opto-mechanical lasing-wavelength tuning coefficient of 127 GHz/nm. The potential applications include optical network, on-chip optical trapping, sensing, and biology detection.

A small zero-order resonant antenna based on the composite right-left-handed (CRLH) principle is designed and fabricated without metallic vias at 30 GHz to have patch-like radiation. The mirror images of two CRLH structures are connected to design the antenna without via holes. The equivalent circuit, parameter extraction, and dispersion diagram are studied to analyze the characteristics of the CRLH antenna. The antenna was fabricated and experimentally verified. The measured realized gain of the antenna is 5.35 dBi at 30 GHz. The designed antenna is free of spurious resonance over a band width of 10 GHz. A passive beamforming array is designed using the proposed CRLH antenna and the Butler matrix. A substrate integrated waveguide is used to implement the Butler matrix. The CRLH antennas are connected to four outputs of a $4\times 4$ Butler matrix. The scanning angles are ${12}^{\circ }$, ${-68}^{\circ }$, ${64}^{\circ }$, and ${-11}^{\circ }$ for excitations from port 1 to port 4 of the $4\times 4$ Butler matrix feeding the CRLH antenna.