Microgrids can be used for securing the supply of power during network outages. Underground cabling of distribution networks is another effective but conventional and expensive alternative to enhance the reliability of the power supply. This paper first presents an analysis method for the determination of microgrid power supply adequacy during islanded operation and, second, presents a comparison method for the overall cost calculation of microgrids versus underground cabling. The microgrid power adequacy during a rather long network outage is required in order to indicate high level of reliability of the supply. The overall cost calculation considers the economic benefits and costs incurred, combined for both the distribution network company and the consumer. Whereas the microgrid setup determines the islanded-operation power adequacy and thus the reliability of the supply, the economic feasibility results from the normal operations and services. The methods are illustrated by two typical, and even critical, case studies in rural distribution networks: an electric-heated detached house and a dairy farm. These case studies show that even in the case of a single consumer, a microgrid option could be more economical than network renovation by underground cabling of a branch in order to increase the reliability.

Autonomous mobile machines are applied increasingly often in outdoor applications, but only in places, where logistic problems and safety issues are resolvable. Solving safety issues require good hazard identification and risk estimation. The aim of this study is to show which new risks emerge in autonomous mobile machines compared to manual machines. There are new risks, which are valid only in autonomous mobile machines (e.g., related to sensors for situational awareness), and risks, which exist in both machine types, but human presence can make the difference in resolving the situation. Humans can take sophisticated protective measures during an unexpected hazardous situation. Another aim of this work is to give information to designers and assessors to consider risks of their own design. Autonomous mobile machines are complex, and their performance is not always easily predictable. A checklist of risks would help an assessor, but currently, it may be difficult to find a checklist for a specific autonomous mobile machine. The main result of this study is a checklist of new risk sources or hazards of autonomous mobile machines.

Wave power is a potential technology for generating sustainable renewable energy. Several types of wave energy converters (WECs) have been proposed for this purpose. WECs operate in a harsh maritime environment that sets strict limitations on how and when the device can be economically and safely reached for maintenance. Thus, to ensure profitable energy generation over the system life cycle, system reliability is a key aspect to be considered in WEC development. In this article, we describe a reliability analysis approach for WEC development, based on the use of reliability block diagram (RBD) modelling. We apply the approach in a case study involving a submerged oscillating wave surge converter device concept that utilizes hydraulics in its power take-off system. In addition to describing the modelling approach, we discuss the data sources that were used for gathering reliability data for the components used in a novel system concept with very limited historical or experimental data available. This includes considerations of the data quality from various sources. As a result, we present examples of applying the RBD modelling approach in the context of WEC development and discuss the applicability of the approach in supporting the development of new technologies.