Against the backdrop of the current Chinese national carbon peak and carbon neutrality policies, higher requirements have been put forward for the construction and upgrading of smart grids. Non-intrusive Load Monitoring (NILM) technology is a key technology for advanced measurement systems at the end of the power grid. This technology obtains detailed power information about the load without the need for traditional hardware deployment. The key step to solve this problem is load decomposition and identification. This study first utilized the Long Short-Term Memory Denoising Autoencoder (LSTM-DAE) to decompose the mixed current signal of a household busbar and obtain the current signals of the multiple independent loads that constituted the mixed current. Then, the obtained independent current signals were combined with the voltage signals to generate multicycle colored Voltage–Current (VI) trajectories, which were color-coded according to the background. These color-coded VI trajectories formed a feature library. When the Convolutional Neural Network (CNN) was used for load recognition, in light of the influence of the hyperparameters on the recognition results, the Bayesian Optimization Algorithm (BOA) was used for optimization, and the optimized CNN network was employed for VI trajectory recognition. Finally, the proposed method was validated using the PLAID dataset. The experimental results show that the proposed method exhibited better performance in load decomposition and identification than current methods.

Optimizing the operation of active distribution networks (ADN) has become more challenging because of the uncertainty created by the high penetration level of distributed photovoltaic (PV). From the convex optimization perspective, this paper proposes a two-layer optimization model to simplify the solution of the ADN optimal operation problem. Firstly, to pick out the ADN "key" nodes, a "key" nodes selection approach that used improved K-means clustering algorithm and two indexes (integrated voltage sensitivity and reactive power balance degree) is introduced. Then, a two-layer ADN optimization model is built using various time scales. The upper layer is a long time scale model with on-load tap changer transformer (OLTC) and Capacitor Bank (CB), and the lower layer is a short time scale optimization model with PV inverters and distributed energy storages (ES). To take into account the PV users’ interests, maximizing PV active power output is added to the objective. Afterwards, under the application of the second-order cone programming (SOCP) power flow model, a linearization method of OLTC model and its tap change frequency constraints are proposed. The linear OLTC model, together with the linear models of the other equipment, constructs a mixed-integer second-order cone convex optimization (MISOCP) model. Finally, the effectiveness of the proposed method is verified by solving the IEEE33 node system using the CPLEX solver.

Against the backdrop of the current carbon peaking and carbon neutrality policies, higher requirements have been put forward for the upgrading and construction of smart grids. Non-intrusive load monitoring (NILM) technology is a key technology for advanced measurement systems at the end of the power grid. It obtains detailed power information of the load, without the need for traditional hardware deployment. The key step to solve this problem is load decomposition and identification. This paper first utilized Long Short Term Memory-Denoising Autoencoder(LSTM-DAE) to decompose the mixed current signal on the household busbar and obtain the current signals of multiple independent loads that constituted the mixed current. Then, the obtained independent current signals were combined with voltage signals to generate multi-cycle colored Voltage-Current(VI) trajectories, which were color-coded according to the background. These colored VI trajectories with background colors formed a feature library. When the CNN network was used for load recognition, considering the influence of hyperparameters on recognition results, the BOA algorithm was used for optimization, and the optimized CNN network was employed for VI trajectory recognition. Finally, the proposed method was validated using the PLAID dataset. Experimental results showed that the proposed method exhibited better performance in load decomposition and identification.

Addressing the imperative for energy transition amid depleting fossil fuels, distributed generation (DG) is increasingly integrated into distribution networks (DNs). This integration necessitates low-carbon dispatching solutions that reconcile economic and environmental objectives. To bridge the gap between conventional “electricity perspective” optimization and emerging “carbon perspective” requirements, this research integrated Carbon Emission Flow (CEF) theory to analyze spatiotemporal carbon flow characteristics within DN. Recognizing the limitations of the single-objective approach in balancing multifaceted demands, a multi-objective optimization model was formulated. This model could capture the spatiotemporal dynamics of nodal carbon intensity for low-carbon dispatching while comprehensively incorporating diverse operational economic costs to achieve collaborative low-carbon and economic dispatch in DG-embedded DN. To efficiently solve this complex constrained model, a novel Q-learning enhanced Moth Flame Optimization (QMFO) algorithm was proposed. QMFO synergized the global search capability of the Moth Flame Optimization (MFO) algorithm with the adaptive decision-making of Q-learning, embedding an adaptive exploration strategy to significantly enhance solution efficiency and accuracy for multi-objective problems. Validated on a 16-node three-feeder system, the method co-optimizes switch configurations and DG outputs, achieving dual objectives of loss reduction and carbon emission mitigation while preserving radial topology feasibility.

Accurately identifying the potential demand response of residential users and establishing a certain scale of aggregated resources for participation in grid interactions can further enhance the demand response regulatory capabilities. Presently, the identification research relies solely on load data mining, making the precise identification of potential demand response among residential users challenging. Hence, this study proposes an approach for identifying potential households for demand response based on the analysis of association rules using multiple heterogeneous data sources. To address the limitations of single-dimensional user potential evaluation indicators and uniform indicator weights, this method integrates multiple heterogeneous data sources for association rule analysis, constructs a multidimensional demand response potential evaluation indicator system, and assigns objective weights to these indicators based on correlation and redundancy analysis. Subsequently, the user potential values are determined using the approximate ideal solution ranking algorithm. The effectiveness of the proposed method is validated through numerical examples.