The design of the simplest compensation filters available for cascaded integrator‐comb (CIC) decimators to date is introducted. These filters require only two additions and can be straightforwardly realised in terms of the integer d as a design parameter, which depends on K , the number of cascaded CIC filters. The proposed compensators have the minimum phase property, useful for low‐delay applications.
Novel finite impulse response architectures for wide passband droop compensation of cascaded integrator‐comb filters are presented. Compared with the recent wide‐band compensators introduced in the literature, the proposed systems achieve better passband droop correction with lower power dissipation, lower hardware utilisation and higher maximum frequency of operation, as validated with post‐place‐and‐route information from FPGA‐based implementations.
Cascaded integrator-comb (CIC) decimators provide natural aliasing rejection in folding bands. However, improving that rejection requires increasing the number of integrator-comb pairs, N , and this affects the attractive simplicity of the CIC system as N grows. For a given N , the worst-case attenuation can still be improved by applying zero rotations. However, state-of-the-art zero-rotation methods introduce coefficients in the CIC filter’s transfer function and therefore complicate the resulting decimation architecture. Here, we show how to rotate zeros in a simple way without these coefficients, such that we only need to add two registers and one adder to the original CIC decimation architecture. Worst-case attenuation improvements can be up to more than 20 dB, depending on the value of N and the wideness of the folding bands. Other efficient architectures to implement these simplified zero-rotated CIC systems are also presented, and a pruning analysis for these architectures is developed.
A useful cascaded integrator comb (CIC)‐based architecture is presented that improves the worst‐case alias rejection of the CIC filter and simultaneously reduces the computational load of its integration section. Since regularity and simplicity are acceptably preserved, the proposed design outperforms other recent CIC‐based architectures from literature where these two desirable characteristics are severely affected.
Alternative data paths for the cascaded integrator-comb (CIC) decimator are presented that can be derived upon applying one or two modifications. In the first modification, the integrator-comb pair that surrounds the downsampling register is replaced by a simpler Integrate-and-Dump (ID) block that performs the same decimation task. The resulting data path is referred to as CIC-ID. In the second modification, the remaining comb filters are replaced by a timemultiplexed comb, and the resulting data path is referred to as CIC-ID-TMUX. Compared with a classic N-stage CIC, CIC-ID saves one arithmetic unit and one register, whereas CIC-ID-TMUX uses the same number of registers but trades (N - 1) arithmetic units for a simpler two-to-one multiplexer. Both CIC-ID and CIC-ID-TMUX perform slightly fewer arithmetic operations per output sample because of the absence of the comb filter absorbed by the ID block. Pruning formulas for both architectures are presented along with implementation details.
31 March 2022 in Circuits, Systems, and Signal Processing