In this paper, forming limit diagrams (FLDs) for an aluminum alloy are predicted through numerical simulations using various localized necking criteria. A comparative study is conducted for the FLDs determined by using the Lemaitre damage approach and those obtained with the modified Gurson-Tvergaard-Needleman (GTN) damage model. To this end, both damage models coupled with elasto-plasticity and accounting for plastic anisotropy have been implemented into the ABAQUS/Explicit software, through the user-defined subroutine VUMAT, within the framework of large plastic strains and a fully three-dimensional formulation. The resulting constitutive frameworks are then combined with four localized necking criteria to predict the limit strains for an AA6016-T4 aluminum alloy. Three of these necking criteria are based on finite element (FE) simulations of the Nakazima deep drawing test with various specimen geometries, while the fourth criterion is based on bifurcation theory. The simulation results reveal that the limit strains predicted by local criteria, which are based on FE simulations of the Nakazima test, are in good agreement with the experiments for a number of strain paths, while those obtained with the bifurcation analysis provide an upper bound to the experimental FLD.
In this work, three numerical necking criteria based on finite element (FE) simulations are proposed for the prediction of forming limit diagrams (FLDs) for sheet metals. An elastic–plastic constitutive model coupled with the Lemaitre continuum damage theory has been implemented into the ABAQUS/Explicit software to simulate simple sheet stretching tests as well as Erichsen deep drawing tests with various sheet specimen geometries. Three numerical criteria have been investigated in order to establish an appropriate necking criterion for the prediction of formability limits. The first numerical criterion is based on the analysis of the thickness strain evolution in the central part of the specimens. The second numerical criterion is based on the analysis of the second time derivative of the thickness strain. As to the third numerical criterion, it relies on a damage threshold associated with the occurrence of necking. The FLDs thus predicted by numerical simulation of simple sheet stretching with various specimen geometries and Erichsen deep drawing tests are compared with the experimental results.
In the current contribution, prismatic and hexahedral quadratic solid–shell (SHB) finite elements are proposed for the geometrically nonlinear analysis of thin structures made of functionally graded material (FGM). The proposed SHB finite elements are developed within a purely 3D framework, with displacements as the only degrees of freedom. Also, the in-plane reduced-integration technique is combined with the assumed-strain method to alleviate various locking phenomena. Furthermore, an arbitrary number of integration points are placed along a special direction, which represents the thickness. The developed elements are coupled with functionally graded behavior for the modeling of thin FGM plates. To this end, the Young modulus of the FGM plate is assumed to vary gradually in the thickness direction, according to a volume fraction distribution. The resulting formulations are implemented into the quasi-static ABAQUS/Standard finite element software in the framework of large displacements and rotations. Popular nonlinear benchmark problems are considered to assess the performance and accuracy of the proposed SHB elements. Comparisons with reference solutions from the literature demonstrate the good capabilities of the developed SHB elements for the 3D simulation of thin FGM plates.
Purpose The purpose of this paper is to propose two linear solid-shell finite elements, a six-node prismatic element denoted SHB6-EXP and an eight-node hexahedral element denoted SHB8PS-EXP, for the three-dimensional modeling of thin structures in the context of explicit dynamic analysis. Design/methodology/approach These two linear solid-shell elements are formulated based on a purely three-dimensional (3D) approach, with displacements as the only degrees of freedom. To prevent various locking phenomena, a reduced-integration scheme is used along with the assumed-strain method. The resulting formulations are computationally efficient, as only a single layer of elements with an arbitrary number of through-thickness integration points is required to model 3D thin structures. Findings Via the VUEL user-element subroutines, the performance of these elements is assessed through a set of selective and representative dynamic elastoplastic benchmark tests, impact-type problems and deep drawing processes involving complex non-linear loading paths, anisotropic plasticity and double-sided contact. The obtained numerical results demonstrate good performance of the SHB-EXP elements in the modeling of 3D thin structures, with only a single element layer and few integration points in the thickness direction. Originality/value The extension of the SHB-EXP solid-shell formulations to large-strain anisotropic plasticity enlarges their application range to a wide variety of dynamic elastoplastic problems and sheet metal forming simulations. All simulation results reveal that the numerical strategy adopted in this paper can efficiently prevent the various locking phenomena that commonly occur in the 3D modeling of thin structural problems.