Large transport aircraft tend to adopt a wing layout with a high aspect ratio and swept-back angle due to the requirement of a high lift-to-drag ratio. Composite material is typically employed to ensure the light weight of the structure, causing serious static aeroelasticity problems to the aircraft. When the airplane is flying in the transonic region, its aerodynamic load is very complex, and the large load leads to large deformation of the wing, triggering geometric nonlinear effects, which further affects the static aerodynamic elasticity characteristics of the wing. In this study, in order to study the static aeroelastic characteristics of the transonic flow of a high-aspect-ratio airfoil, a new design method of the scaled similar optimization model is described, and the change in the model lift coefficient due to geometrically nonlinear static aeroelasticity effects when the angle of attack is changed was investigated by using simulation and wind tunnel test methods. In order to ensure the accuracy of the wing shape when the model was deformed greatly, this study employed the structural design scheme of the wing with the skin as the main stiffness component, and the thicknesses of different regions of the skin were used as the design variables for the stiffness optimization design. The engineering algorithm of nonlinear finite elements was used in this study to calculate the curve of lift with the angle of attack considering the geometric nonlinear static aeroelasticity effect. The results show that the similarity optimization process employed in this study can be used to complete the design of the high-speed aerostatic wing test model, and the wind tunnel test results show that geometric nonlinearity has a large impact on the lift coefficient of the wing.

This paper presents a preliminary investigation into the aeroelastic behavior of a tailless flying wing equipped with a rotating wingtip. Based on the configuration of Innovative Control Effectors (ICE) aircraft, an aeroelastic model of the tailless flying wing with a rotating wingtip has been developed. Both numerical simulation and wind tunnel tests (WTTs) are employed to study the aeroelastic characteristics of this unique design. The numerical simulation involves the coupling of computational fluid dynamics (CFD) and implicit dynamic approaches (IDAs). Using the CFD/IDA coupling method, aeroelastic response results are obtained under different flow dynamic pressures. The critical flutter dynamic pressure is identified by analyzing the trend of the damping coefficient, with a focus on its transition from negative to positive values. Additionally, the critical flutter velocity and flutter frequency are obtained from the WTT results. The critical flutter parameters, including dynamic pressure, velocity, and flutter frequency, are examined under different wingtip rotation frequencies and angles. These parameters are derived using both the CFD/IDA coupling method and WTT. The results indicate that the rotating wingtip plays a significant role in influencing the flutter behavior of aircraft with such a configuration. Research has shown that the rotation characteristics of the rotating wingtip are the primary factor affecting its aeroelastic behavior, and increasing both the rotation frequency and rotation angle can raise the flutter boundary and effectively suppress flutter onset.