Aluminum (Al) is one of the most widely used metals for industry and household applications, but its longevity is limited by its tendency for corrosion. In this work, we report a facile method to fabricate superhydrophobic Al surfaces that have excellent anti-corrosion effect. The surface is obtained by etching Al in CuCl₂ solution to form the micro–nano-pit surface texture followed by lowering its surface energy in an aqueous ethanol solution of stearic acid. The superhydrophobic Al surfaces show water contact angles as high as 165°. Electrochemical tests demonstrate that the corrosion rate of the Al surface drops by 94.5% after the superhydrophobic modification (corrosion current density lowers from 1.11 × 10^–4 to 6.10 × 10^–6 A cm^–2). We also show that the superhydrophobic surface will protect the Al from corrosion even under a very harsh environment. In addition, our method is scalable and the superhydrophobic surfaces exhibit excellent flexible and reparable properties. This anti-corrosive superhydrophobic Al surface will prolong Al in its broad usage.

We report a novel gel polymer electrolyte (GPE) for lithium ion batteries, which is prepared using P(MMA-AN-EA) as a polymer matrix and doping with nano-SiO₂and nano-Al₂O₃simultaneously.

Femtosecond (fs) laser processing can significantly alter the optical, thermal, mechanical, and electrical properties of materials. Here, we show that fs-laser processing transforms aluminum (Al) to a highly efficient and multipronged heat exchanger. By optimizing the formed surface nano- and microstructures, we increase the Al emissivity and surface area by 700% and 300%, respectively. Accordingly, we show that fs-laser treated Al (fs-Al) increases the radiative and convective cooling power of fs-Al by 2100% and 300%, respectively, at 200 °C. As a direct application, we use fs-Al as a heat sink for a thermoelectric generator (TEG) and demonstrate a 280% increase in the TEG output power compared to a TEG with an untreated Al heat exchanger at 200 °C. The multipronged enhancement in fs-Al heat exchange properties lead to an increase in the TEG output power over a wide temperature (T) range (T>50°C). Conversely, a simple radiative cooling heat exchanger increases the TEG output power within a limited temperature range (T>150°C). We investigate the laser processing parameters necessary to maximize the spectral emissivity and surface area of fs-Al. Fs-Al promises to be a widely used and compact heat exchanger for passive cooling of computers and data centers as well as to increase the efficiency of TEGs incorporated in sensors and handheld electronics.