Tannery wastewater is one of the most toxic waste generated in industries. In spite of this, there still remains a paucity of information on characteristics of wastewater generated from artisanal tanneries. This study, therefore, assessed the water consumption, wastewater generation rates, physicochemical and microbiological characteristics of wastewater produced from each process unit of an artisanal tannery in Ghana. The study revealed that the total amount of water use in the tannery ranged between 1171 and 2120L/day whilst the total volume of wastewater generated was within 820 and 1324L/day. Physicochemical characteristics of the different wastewater types generated at the tannery including chemical oxygen demand (13600–24333.30 mg/L), biochemical oxygen demand (1445.64–2803 mg/L), ammonia (3.20–21.38 mg/L), colour (950.35–53900.10PtCo), electrical conductivity (8170 - 10080 μS/cm), turbidity (450.24–1805NTU), suspended (1033.50–3216.40 mg/L) and dissolved (26166.50–4996.65 mg/L) solids exceeded the guidelines set by the Ghana Environmental Protection Agency. There were also high levels of chlorides, sodium, sulphates and calcium ions. The most dominant anion and cation in the wastewater were chlorides (715–20490.60 mg/L) and sodium ions (258–14056.45 mg/L) respectively. Heavy metals identified in the wastewater included zinc, aluminium, iron and chromium ions with the most dominant one being aluminium ions (0.58–78.18 mg/L). Whilst the E-coli was below detectable limit, the count of total coliforms ranged between 0 and 4.5 × 10⁴CFU/100mL. Five helminth egg species (Ascaris lumbricoides, hookworm, Trichuris trichiura, Strongyloides stercoralis, and Enterobius vermicularis) were identified with their numbers surpassing the safe limit set by the World Health Organisation for irrigation purposes. These results indicated that the indiscriminate discharge of the untreated wastewater on the bare soil as it is practised at the tannery has the potential to adversely affect public and environmental health. Appropriate treatment schemes are therefore, required to treat the wastewater to safe limits prior to discharge.

Approximately 15% of wastes generated in hospitals is hazardous. Improper handling of this waste renders the remaining fraction infectious which is perilous to the health of hospital workers, patients, visitors and even communities. Sufficient data on medical waste management practices particularly in low-income countries such as Ghana is required for effective monitoring and policy making. This study sought to assess the waste generation rates, waste management practices, frequency of sharp injuries and the knowledge of health-care workers on waste management guidelines in Ho Teaching Hospital in Ghana. Data was collected through observations and questionnaire administration from 100 health-care workers. The results revealed that the total amount of wastes generated was 1.70kg/patient/day (490.62 kg/day) comprising of 57.48%, 33.98% and 8.54% of general, infectious and hazardous wastes respectively. Further investigations showed that 52% of the health-care workers knew about the existence of a hospital waste management policy and 89% attested that they had received training on medical waste management. The existing waste management committee was however, non-functional. Waste segregation at source and the use of color-coded waste receptacles were not strictly followed. Contaminated general wastes were landfilled whiles hazardous wastes were either incinerated or buried. Only 11% of the waste handlers were always completely dressed in personal protective equipment and about 77% of the waste handlers always sustained sharp injuries. Incentivizing the waste management team to ensure strict adherence to a waste management plan would improve waste management at the hospital.

The production of leather from animal skins and hides through tanning processes began in the pre-historic ages. Despite the origination of new leather making techniques such as chrome tanning which is being employed extensively today, the traditional method of leather production primarily through vegetable tanning is still being practised mostly in artisanal tanneries in developing nations including Ghana. Artisanal leather making, thus, contributes beneficially to rural livelihood. Nevertheless, the growth of this sector has been stifled by the lack of innovative technologies to enhance productivity. This challenge could be partly linked to the knowledge gap on the scientific principles governing artisanal leather production processes. This study, therefore, elaborates on various process steps and materials employed in traditional leather making in Ghana and the scientific principles underlying each of the processes. It also makes a comparison between traditional and modern leather manufacturing processes and identifies knowledge and technological gaps which would inspire in-depth scientific research into artisanal leather making. Graphical

In the Eastern Region of Ghana, 95 % of residents have access to boreholes. However, approximately 30 % of these boreholes are characterized by unpleasurable taste, odour, oily scum and particulate matter. Thus, this study aimed to assess water quality, predict the sources of groundwater contaminants, evaluate the human health risk and to generate spatial distribution and health risk maps. In achieving this, the water quality of 136 boreholes in the region was evaluated through Water Quality Index (WQI) and Groundwater Pollution Index (GPI) analyses. Multivariate statistical procedures, namely, principal component and correlation analyses were employed to define the major groundwater pollutants and their possible sources. Non-carcinogenic health risk to infants, children and adults through nitrates, iron, manganese and fluorides ingestion was also assessed. The results revealed that groundwater in the region is generally slightly acidic with a mean pH of 6.30. WQI analysis grouped 68 % of the groundwater samples under the ‘excellent’ and ‘good’ water types with the remaining percent categorized under ‘poor’, ‘very poor’ and ‘unsafe’ drinking water types. GPI analysis classified 95 %, 2.21 % and 2.79 % of the boreholes as ‘insignificant’, ‘low’ and ‘highly’ polluted zones. From the multivariate analyses, the dominant pollutants were iron, manganese, chlorides, sodium, fluorides, potassium, turbidity, total suspended and dissolved solids, hardness, alkalinity, sulphates, nitrates and phosphates. The sources of these contaminants are primarily from rock-water interactions and fertilizers. Health risk assessment for nitrates, fluorides, iron and manganese ingestion revealed that 23, 17 and 15 boreholes in the region are likely to pose non-carcinogenic health risk to infants, children and adults respectively. Health risk maps indicated that the most vulnerable districts were Atiwa East, Fanteakwa North, Achiase, Birim South, Akwapim, Suhum and Ayensuano. From these findings, it is imperative that appropriate groundwater remediation measures are implemented in the region to protect public health.

Vegetable tannery wastewater, highly laden with recalcitrant organics, is not easily treatable through biological processes. This study focuses on the use of response surface methodology in optimizing a coagulation-flocculation process for pretreatment of vegetable tannery wastewater. This study also assessed the possibility of replacing chemical coagulants such as aluminum sulphate with green alternatives such as cassava starch and orange peel powder. The effects of coagulant dosage and pH on three key wastewater quality parameters (chemical oxygen demand (COD) and total suspended solids (TSS)’s removal efficiencies as well as sludge volume index (SVI)) were also assessed. Quadratic models developed for all the three responses were adequate. The optimal conditions were attained at a pH of 3.17 and a dosage of 2.76 g/L for cassava starch coagulant, pH of 3.74 and a dosage of 5.16 g/L for orange peel powder coagulant, and pH of 6.09 and a dosage of 11.60 g/L for aluminum sulphate. The COD and TSS removal efficiencies as well as SVI achieved under these optimal conditions were 37.25%, 73.95%, and 14.80 mL/g, respectively, for cassava starch coagulant; 17.97%, 66.08%, and 19.87 mL/g, respectively, for orange peel powder coagulant; and 38.51%, 76.06%, and 29.57 mL/g, respectively, for aluminum sulphate. The outperformance of cassava starch over orange peel powder and its comparable results with aluminum sulphate makes the former a more environment-friendly alternative to aluminum sulphate for treatment of tannery wastewater.