The sulfur content in crude oil varies between 1000 and 30,000 ppm (parts per million), meaning that its removal from fuels requires significant technical and economic effort. Growing concern about pollution, accompanied by stricter environmental regulations, have led to the development of strategies to mitigate the negative effects of sulfur-containing compounds in petroleum, which can cause malfunctions in manufacturing plants and refineries, such as causing catalyst poisoning in catalytic reforming equipment and sulfur dioxide emissions that have been generated through the use of fuels in vehicles, vessels, furnaces, etc. Sulfur is one of the main pollutants found in diesel and gasoline. The hydrodesulfurization method removes sulfur and nitrogen-containing compounds from diesel and gasoline, ensuring compliance with current environmental regulations established for the import and export of fuels. In addition, hydrodesulfurization contributes to reducing sulfur dioxide and nitrogen dioxide emissions into the environment and prevents corrosion, which increases safety for both manufacturing plants and end consumers. This situation is analyzed in this paper, considering Mexican legislation about fuels and their usage. Sulfur is an important pollutant contained in diesel and gasoline fuels; it exhibits lubricant properties, helping to reduce the maintenance intervals of the machines and increase engine life. Therefore, its removal from fuel blends is a topic of great scientific interest as researchers look for different lubricant alternatives, which are relevant to motor vehicle engines.
21 January 2020 in REVISTA DE CIENCIAS TECNOLÓGICAS
En este trabajo de investigación se obtienen hidrocarburos liquidos combustibles (gasolina) con rendimiento del 90% por medio de pirólisis del polietileno de alta densidad (PEAD) a 390 ± 5 °C sobre el catalizador α−PbO. La masa catalítica se varía en 10, 15, 20 y 40% p/p utilizando 10 g de PEAD por cada experimento. El α−PbO se sintetizó a 550 °C en atmósfera de aire durante 1 hora. Los productos líquidos son caracterizados por espectroscopia infrarroja con transformada de Fourier (FT-IR) y cromatografía de gases y espectrometría de masas (GC/MS). La relación óptima experimental de PEAD/α−PbO para la conversión del polietileno residual es 20% α−PbO. Los análisis por FT-IR y GC/MS, permiten corroborar que los líquidos obtenidos corresponden a hidrocarburos con cadenas en un intervalo de 6 a 10 carbonos (C6–C10) y contienen un calor de combustión promedio de 10.9492 kcal/g con potencial aplicación como combustibles alternativos.
25 September 2019 in REVISTA DE CIENCIAS TECNOLÓGICAS
La acumulación de plomo en el ambiente es una causa de problemas de salud en humanos. La dosis letal media reportada en mg/kg para Pb, Pb (NO3)2 y PbO es de 400, 2250 y 2000, respectivamente. Debido a la alta toxicidad del plomo metálico con respecto al nitrato de plomo se ha desarrollado una metodología para transformar el plomo residual a nitrato de plomo, cuya toxicidad es cinco veces menor que el plomo metálico. Por otra parte, el nitrato de plomo puede ser precursor para la síntesis de materiales con potencial aplicación industrial. La síntesis del Pb (NO3)2 se realiza mezclando el plomo metálico residual y ácido nítrico 15.7 molar en una proporción de reactivos [1:4]. Posteriormente, la mezcla se somete a agitación magnética hasta disolver el plomo y formar un precipitado blanco, se seca a 110 °C durante 1 h obteniendo un rendimiento experimental del 99 %. El material sintetizado se caracteriza por difracción de rayos–X, microscopía electrónica de barrido y espectroscopia por dispersión de energía. Así mismo, esta metodología tiene un impacto favorable en los ecosistemas, ya que la contaminación por plomo se verá disminuida.
Sulfur content in crude oil varies between 1,000 and 30,000 ppm (parts per million), meaning its removal from fuels requires significant technical and economic effort. Growing concerns about pollution, accompanied by stricter environmental regulations, have led to the development of strategies to mitigate the negative effects of sulfur-containing compounds in petroleum, which can cause malfunctions in plants and refineries, such as catalyst poisoning in catalytic reforming equipment and sulfur dioxide emissions generated by the use of fuels in vehicles, vessels, furnaces, among others. Sulfur is one of the main pollutants in diesel and gasoline. The hydrodesulfurization method removes sulfur and nitrogen-containing compounds from diesel and gasoline, ensuring compliance with environmental regulations established for the import and export of fuels with concentrations below 8 ppm and 0.31 wt.% in diesel blends. In addition, it contributes to reducing sulfur dioxide and nitrogen dioxide emissions into the environment and prevents corrosion, which increases safety for both plants and end consumers.