The deep shale gas reservoirs of the southern Sichuan Basin exhibit high temperatures, high pressure, large stress differentials, and complex natural fracture systems. Since 2019, hydraulic fracturing technology in this region has evolved through four stages: exploratory fracturing, intensive limited-volume fracturing, tight spacing with controlled fluid and proppants, and balanced fracturing that combines long-section temporary plugging with short-section intensive cutting. Despite these advances, production remains suboptimal due to inefficient reserve utilization, a lack of quantitative methods for residual gas evaluation, and unclear identification of the remaining reserves. To address these challenges, we developed an integrated workflow combining dynamic production analysis, geomechanical modeling, and numerical simulation to evaluate representative fracturing techniques. Fracture propagation in the well group was modeled in the in-house hydraulic fracture simulator, ZFRAC, to assess fracture geometry, while production history and geological data were used to build calibrated reservoir simulation models. This enabled quantitative assessment of effective fracture parameters, reserve utilization, and residual gas distribution. The results show significant intra-stage heterogeneity driven by stress interference, effective fracture half-lengths of 60–105 m, and a cut-off ratio (proportion of effective fracture half-length to wetted fracture half-length) of 60–93%. Reserve utilization peaked at 60% for intensive limited-volume fracturing, while the efficacy of long-section temporary plugging was limited. These findings offer critical insights for optimizing infill strategies and enhancing sustainable shale gas development in southern Sichuan.
In heterogeneous edge-water carbonate gas reservoirs during the middle-to-late development stage, edge-water invasion and pressure depletion significantly compromise production stability and gas recovery. To investigate water invasion behavior under permeability heterogeneity and evaluate the effectiveness of CO2 injection for water control and enhanced gas recovery, a series of long-core depletion experiments and three-dimensional vertically heterogeneous physical-model experiments were conducted based on representative reservoir conditions. The results show that permeability contrast plays a key role in governing water breakthrough timing and gas production performance. High-permeability cores experience earlier water breakthrough but contribute higher overall recovery, whereas low-permeability cores exhibit delayed depletion and pronounced production decline after breakthrough due to large pressure differentials. In multilayer commingled production, interlayer pressure imbalance drives fluid crossflow from low- and medium-permeability zones toward high-permeability zones, leading to premature water breakthrough, delayed layer activation, and the development of water-blocked gas zones, thereby intensifying interlayer heterogeneity. After depletion, CO2 injection effectively modifies fluid flow pathways and improves reservoir connectivity. Through gravity-assisted displacement and energy replenishment, CO2 mitigates water invasion, reconnects previously isolated gas zones, and enhances overall reservoir utilization. The findings demonstrate that CO2 injection provides a dual benefit in both water control and production enhancement, offering valuable insights for improving recovery strategies in heterogeneous edge-water gas reservoirs.