The aim of this paper was to assess the total antioxidant capacity of some commercial fruit juices (namely citrus), spectrophotometrically and by the biamperometric method, using the redox couple DPPH· (2,2-diphenyl-1-picrylhydrazyl)/DPPH (2,2-diphenyl-1-picrylhydrazine). Trolox^® was chosen as a standard antioxidant. In the case of the spectrophometric method, the absorbance decrease of the DPPH· solution was followed. For the biamperometric method, the influence of some parameters like the potential diference, ΔE, DPPH· concentration, and Trolox^® concentration was investigated. The calibration graph obtained for Trolox^® presents linearity between 5 and 30 µM, (y = 0.059 x + 0.0564, where y represents the value of current intensity, expressed as μA and x the value of Trolox^® concentration, expressed as μM; r² = 0.9944). The R.S.D. value for the biamperometric method was 1.29% (n = 10, c = 15 μM Trolox^®). In the case of the spectrophotometric method, the calibration graph obtained for Trolox^® presents linearity between 0.01 and 0.125 mM (y = -9.5789 x+1.4533, where y represents the value of absorbance and x, the value of Trolox^® concentration, expressed as mM; r² = 0.9963). The R.S.D. value for the spectrophotometric method was 2.05%. Both methods were applied to total antioxidant activity determination in real samples (natural juices and soft drinks) and the results were in good agreement.

A method was developed for assessing ascorbic acid concentration in fruit juices and wine by differential pulse voltammetry. The oxidation peak for ascorbic acid occurs at about 530 mV (versus SCE) on a Pt strip working electrode and at about 470 mV on a carbon paste working electrode. The influence of the operational parameters like the pulse amplitude and the pulse period on the analytical signal was investigated. The obtained calibration graph shows a linear dependence between the peak height and ascorbic acid concentration within the range 0.31-20 mM with a Pt working electrode, and within the range 0.07-20 mM with a carbon paste working electrode. The equation of the calibration graph was y = 21.839x + 35.726, r² = 0.9940, when a Pt strip electrode was used (where y represents the value of the current intensity measured for the peak height, expressed as µA and x the analyte concentration, as mM). R.S.D. = 2.09%, n = 10, C_{ascorbic acid} = 2.5 mM. The equation of the calibration graph was y = 3.4429x + 5.7334, r² = 0.9971, when a carbon paste electrode was used (where y represents the value of intensity measured for the peak height, expressed as µA and x the analyte concentration, as mM). R.S.D. = 2.35%, n = 10, C_{ascorbic acid} = 2.5 mM. The developed method was applied to ascorbic acid assessment in fruit juices and wine. The ascorbic acid content determined ranged between 6.83 mg/100 mL juice for soft drinks (Fanta Madness) and 54.74 mg/100 mL for citrus (lemon) juices obtained by squeezing fruit. Different ascorbic acid concentrations (from standard solutions) were added to the analysed samples, the degree of recovery being comprised between 94.74 and 104.97%. The results of ascorbic acid assessment by differential pulse voltammetry were compared with those obtained by cyclic voltammetry. The results obtained by the two methods were in good agreement.