In the modern electrical distribution network and utility companies a steady increase in the need for high quality and safe delivery of electricity to consumers is evident, which requires an adequate distribution network, that is a network with high quality voltage and low loss of energy, with a small number of failures and equipment failure , etc. In this paper is proposed a way of representing the mathematical model of distribution networks. For calculations of energy applications, the best way for representation distribution network is in form of graph of the radial structure. By presenting the distribution network in the form of a radial structure graph, which consists of nodes and branches, possible through the use of specialized compensation algorithms for the calculation of steady state and fault analysis. Advantages of these algorithms, as compared to other algorithms are much shorter time needed for calculation and much higher accuracy of calculation results.
This study develops and empirically evaluates a multilevel analytical framework linking AI-generated mathematical reasoning, students’ diagnostic reasoning, and mathematics achievement in AI-supported mathematical problem solving. A classroom intervention with 76 undergraduate Calculus A students generated 380 repeated student–problem observations across five mathematical tasks and three instructional formulations. Students evaluated AI-generated solutions for final-answer correctness, methodological correctness, and procedural completeness, identified mathematical errors, and proposed corrections before completing an individual posttest. Hierarchical mixed-effects models and student-level achievement analyses were used to examine successive stages of the learning process. Instructional formulation was not significantly associated with the quality of AI-generated mathematical reasoning. Final-answer correctness, methodological correctness, and procedural completeness showed substantial task-specific variation. Instructional formulation was significantly associated with students’ error detection, with higher detection performance under Instruction Types B and C than under Type A, while AI-generated response quality remained comparable across instructional formulations. Baseline mathematical proficiency was the strongest predictor of posttest performance. Students’ Mean Error-Detection Event Rate was positively associated with posttest achievement. No robust overall independent association between instructional formulation and posttest achievement was identified after baseline adjustment. Students’ diagnostic engagement with AI-generated mathematical reasoning was associated with subsequent mathematics achievement, supporting the analysis of diagnostic reasoning as a distinct component of AI-supported mathematics learning.
1 March 2026 in International Journal of Power Electronics and Drive Systems (IJPEDS)
This study presents a method for estimating efficiency in three-phase squirrel-cage induction motors with copper and aluminum rotor cages. A detailed two-dimensional transient finite-element model of a 1.25 kW motor was created and analyzed under rated conditions (500 V, 50 Hz, 990 rpm, 75 °C) to determine torque, slip, losses, and efficiency. Finite-element results confirmed the copper rotor's advantage, with 11.0% higher efficiency (85.1% compared to 76.7%) and 37.5% lower rotor-cage losses (80 W compared to 128 W) compared to aluminum. For rapid efficiency prediction, both Mamdani-type fuzzy inference system (FIS) and adaptive neuro-fuzzy inference system (ANFIS) models were developed using simulation data. The fuzzy system showed a maximum deviation of 0.8% for the copper rotor, while the neuro-fuzzy approach achieved effective nonlinear mapping for both rotor types with R² = 0.872 against finite-element benchmarks. Sensitivity tests with ±0.3% slip and ±15 W loss variations maintained estimation errors below 2.5%. This combined simulation and intelligent system methodology enables practical efficiency evaluation and rotor material comparison for motor condition assessment and industrial energy management.
30 June 2026 in Polityka Energetyczna – Energy Policy Journal
The study analyses the wind energy potential of Kosovo using geographic information systems (GIS), integrating environmental and infrastructural factors. The methodology involves modelling wind speeds from the Global Wind Atlas, assessing terrain characteristics through the Shuttle Radar...