We report a novel type of monolithically integrated tunable semiconductor laser. The tuning is achieved by three intracavity Mach-Zehnder interferometers, realized in passive waveguides and using voltage-controlled electro-optic phase modulators requiring only four control voltages. The potential of the design is demonstrated by a realized laser system that shows an optical linewidth of 363 kHz, output power of 3 mW, and a record tuning range of 74.3 nm. Such a continuous wavelength span is in excess of any monolithic semiconductor laser reported up to date. Precision of the tuning mechanism is demonstrated by a scan over a 0.89-GHz-wide absorption line of acetylene. The laser design is suitable for a number of applications, including gas spectroscopy, telecommunication, and optical coherence tomography. The laser has been fabricated in a multi-project wafer run on an indium phosphide-based generic photonic foundry platform and demonstrates the potential of these technology platforms.

In this article, the potential of photonic integrated circuits (PICs) for modern gas sensing applications is discussed. Optical detection systems can be found at the high-end of the currently available gas detectors, and PIC-based optical spectroscopic devices promise a significant reduction in size and cost. The performance of such devices is reviewed here. This discussion is not limited to one semiconductor platform, but includes several available platforms operating from the visible wavelength range up to the long wavelength infrared. The different platforms are evaluated regarding their capabilities in creating a fully integrated spectroscopic setup, including light source, interaction cell and detection unit. Advanced spectroscopy methods are assessed regarding their PIC compatibility. Based on the comparison of PICs with state-of-the-art bulk optical devices, it can be concluded that they can fill the application space of compact and low cost optical gas sensors.

We present a widely tunable extended cavity ring laser operating at 2 μm that is monolithically integrated on an indium phosphide substrate. The photonic integrated circuit is designed and fabricated within a multiproject wafer run using a generic integration technology platform. The laser features an intracavity tuning mechanism based on nested asymmetric Mach–Zehnder interferometers with voltage controlled electro-refractive modulators. The laser operates in a single-mode regime and is tunable over the recorded wavelength range of 31 nm, spanning from 2011 to 2042 nm. Its capability for high-resolution scanning is demonstrated in a single-line spectroscopy experiment using a carbon dioxide reference cell.

We report a monolithically integrated coupled extended-cavity distributed Bragg reflector laser with, to our knowledge, the lowest reported intrinsic linewidth of ∼10 kHz, which is extracted from a corresponding frequency-noise level of ∼3200 Hz²/Hz, realized on an InP generic foundry platform. Using the delayed self-heterodyne method, the experimentally measured linewidth was 45 kHz. The laser has an on-chip optical output power of 18 mW around 1550 nm at an injection current of 95 mA. The laser operates in a single-mode regime with a side-mode suppression ratio of 54 dB. Our monolithic approach paves the way toward further integration, such as integrated quantum key distribution transceivers.

Absorption spectroscopy on CO₂ for the determination of gas temperature is reported. Direct absorption of a frequency comb laser through a gas cell at atmospheric conditions is analysed with a virtually imaged phased array spectrometer. Several measurement and analysis techniques are investigated to find the parameters most sensitive to changes in the temperature. Some of these show qualitative agreement with theoretical predictions where the trend is similar to the calculated values.

To be of commercial interest, gas sensors must optimise, among others, sensitivity, selectivity, longevity, cost and measurement speed. Using the example of ammonia, we establish that integrated optical sensors provide means to maintain the benefits of optical detection set-ups at, in principle, a lower cost and smaller footprint than currently available commercial products. Photonic integrated circuits (PICs) can be used in environmental and agricultural monitoring. The small footprint and great cost scaling of PICs allow for sensor networks with multiple devices. We show, that Indium Phosphide based commercial foundries reached the technological maturity to enable ammonia detection levels at less than 100 ppb. The current unavailability of portable, low cost ammonia sensors with such detection levels prevents emission monitoring, for example, in pig farms. The feasibility of these sensors is investigated by applying the common noise figures of the multiproject wafer platforms operating around 1550 nm to a model for an absorption measurement. The analysis is extended to other relevant gas species with absorption features near telecom-wavelengths.