This literature review examines process, design, and cost issues related to using oxidation ponds for wastewater treatment. Many of the topics have applications at either full scale or in isolation for laboratory analysis. Oxidation ponds have many advantages. The oxidation pond treatment process is natural, because it uses microorganisms such as bacteria and algae. This makes the method of treatment cost-effective in terms of its construction, maintenance, and energy requirements. Oxidation ponds are also productive, because it generates effluent that can be used for other applications. Finally, oxidation ponds can be considered a sustainable method for treatment of wastewater.

Fluoride ions present in drinking water are beneficial to human health when at proper concentration levels (0.5–1.5 mg L⁻¹), but an excess intake of fluoride (>1.5 mg L⁻¹) may pose several health problems. In this context, reducing high fluoride concentrations in water is a major worldwide challenge. The World Health Organization has recommended setting a permissible limit of 1.5 mg L⁻¹. The application of electrocoagulation (EC) processes has received widespread and increasing attention as a promising treatment technology and a competitive treatment for fluoride control. EC technology has been favourably applied due to its economic effectiveness, environmental versatility, amenability of automation, and low sludge production. This review provides more detailed information on fluoride removal from water by the EC process, including operating parameters, removal mechanisms, energy consumption, and operating costs. Additionally, it also focuses attention on future trends related to improve defluoridation efficiency.

This study assessed the efficiency of electrocoagulation (ECF) coupled with an addition of chemical coagulant to decolorize textile dye. Tests were conducted using Box Behnken methodology to vary six parameters: dye type, weight, coagulant type, dose, initial pH and current density. The combination of electrocoagulation and chemical coagulation was able to decolorize dye up to 99.42 % in 30 min of treatment time which is remarkably shorter in comparison with using conventional chemical coagulation. High color removal was found to be contingent upon the dye type and current density, along with the interactions between the current density and the coagulant dose. The addition of chemical coagulants did enhanced treatment efficiency.

Wastewater-based epidemiology (WBE) for the detection of agents of concern such as severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has been prevalent in literature since 2020. The majority of reported research focuses on large urban centers with few references to rural communities. In this research the EPA-Storm Water Management Model (EPA-SWMM) software was used to describe a small sewershed and identify the effects of temperature, temperature-affected decay rate, flow rate, flush time, fecal shedding rate, and historical infection rates during the spread of the Omicron variant of the SARS-CoV-2 virus within the sewershed. Due to the sewershed's relative isolation from the rest of the city, its wastewater quality behavior is similar to a rural sewershed. The model was used to assess city wastewater sampling campaigns to best appropriate field and or lab equipment when sampling wastewater. An important aspect of the assessment was the comparison of SARS-CoV-2 quantification methods with specifically between a traditional microbiological lab (practical quantitation limit, PQL, 1 GC/mL) versus what can be known from a field method (PQL 10 GC/mL). Understanding these monitoring choices will help rural communities make decisions on how to best implement the collection and testing for WBE agents of concern. An important outcome of this work is the knowledge that it is possible to simulate a WBE agent of concern with reasonable precision, if uncertainties are incorporated into model sensitivity. These ideas could form the basis for future mixed monitoring-modeling studies that will enhance its application and therefore adoption of WBE techniques in communities of many sizes and financial means.