Colorants are component that is commonly added to many kinds of product, including food products. Regardless of its effectiveness and lower price, the effects of synthetic colorants towards human’s health become a challenge for food colorant industries. Production of natural food colorant using microorganism as the producing agent is a promising prospect because microorganism has a high growth rate.Monascus purpureuscan produce a set of natural pigments consist of yellow (monascin and ankaflavin), orange (rubropunctatin and monascorubrin) and red (rubropunctamine and monascorubramine) pigment. The objective of this research is to optimize the micronutrient composition in the medium for the production of Monascus pigment through solid-state fermentation using the job’s tears (Coix lacryma-jobi L) as the substrate. Response surface method (RSM) was used to optimize the concentration of four substrate components: MSG, NaCl, KH2PO4, and MgSO4. From the experiment, it was found that the maximum red pigment was produced in medium with additional of (w/w): MSG 1.496%, NaCl 1.0%, KH2PO43.515% and MgSO40.206%. The yellow pigment was maximally produced in medium with additional of (w/w): MSG 1.5%, NaCl 1.0%, KH2PO42% and MgSO40.2%. Biomass was maximally produced in the medium with additional of (w/w): MSG 1.41%, NaCl 1.01%, KH2PO45.0% and MgSO40.2%. Among those nutrients, MSG gave the biggest impact on the increasing of pigment and biomass production.
29 April 2025 in ASEAN Journal of Chemical Engineering
Institut Teknologi Bandung (ITB) has mandated several key changes in the general design framework of the Curriculum 2024. Several institution-wide mandatory courses centered around SDG & Industry 4.0 issues were implemented as a part of the 2025-2050 ITB Development Master Plan. This paper describes the review and improvement processes undertaken by the Chemical Engineering Undergraduate Program at ITB of its Program Educational Objectives (PEO) and its entire hierarchical learning outcomes. This review was undertaken in 2023-2024 both as a part of periodic outcomes assessment and evaluation (bottom-up approach), and to define the articulation of new mandatory courses and Program offering variations required by ITB (top-down approach). The current PEO resulted from the latest revision during the Curriculum 2019 development and were deemed to be still relevant for the next 5-10 years. Direct and indirect assessments of graduate learning outcomes (CPL) since 2019 indicated a satisfactory overall attainment by the graduates and their relevance to the needs of graduates’ employers. The Program-level outcomes were also deemed to be sufficiently flexible to accommodate ITB's current policies for the new curriculum. Minor revisions were undertaken on Graduate Sub-Learning Outcomes (Sub-CPL) to better align with modern computational skillset requirements of the industry.
This study investigates Fenton-based processes for textile dye degradation, focusing on Direct Red 28 (DR28), Reactive Blue 19 (RB19), and Reactive Black 5 (RBk5). Results reveal varying effectiveness of catalyst–radical combinations, with copper and peroxydisulfate consistently performing well, especially on RBk5 with 100% and 98.5% decolorization and total organic carbon (TOC) reduction, respectively. Iron faces limitations with DR28 due to sediment formation, resulting in 3.5% and 52.7% TOC removal when paired with hydroxyl and peroxydisulfate radicals, correspondingly. Unexpectedly, cobalt shows notable capabilities with RBk5, reaching 87.2% TOC removal, but performs poorly on the other two dyes, with less than 20% TOC removal when paired with hydroxyl radicals. Cost analysis highlights the cost-effectiveness of the standard photo-Fenton process for easy-to-degrade dyes with a cost of $0.174/g TOC removed, while copper emerges as a viable option for recalcitrant dyes, costing $0.371/g TOC removed. Overall, this research enhances understanding of catalyst–radical interactions on various dyes, a topic that is scarcely discussed in other research, and expands upon it by using techno-economic analysis for Fenton-based technologies for textile wastewater treatment, as a consideration for technology selection in actual application.