The accelerated growth of the transport sector has increased oil consumption and greenhouse gas (GHG) emissions, intensifying global environmental challenges. The electrification of transportation has emerged as a key strategy to achieve sustainability targets, with electric vehicles (EVs) expected to account for 50% of global car sales by 2035. However, widespread adoption requires smart infrastructure capable of enabling dynamic in-motion charging. In this context, Electric Road Systems (ERSs), particularly those based on Wireless Power Transfer (WPT) technologies, offer a promising solution by transferring energy between road-embedded transmitters and vehicle-mounted receivers. This study assesses the structural response and service life of conventional and electrified asphalt pavement sections representative of the Spanish road network. Several standard pavement configurations were analyzed under heavy traffic (dual axles, 13 tons) using a hybrid approach combining mechanistic–empirical multilayer modeling and three-dimensional Finite Element Method (FEM) simulations. The electrified designs integrate prefabricated charging units (CUs) placed at a 9 cm depth, disrupting the structural continuity of the pavement. The results reveal stress concentrations at the CU–asphalt interface and service life reductions of up to 50% in semiflexible pavements. Semirigid sections performed better, with average reductions close to 40%. These findings are based on numerical simulations of standard Spanish sections and do not include experimental validation.
Electrified roads with embedded wireless power transfer (WPT) systems provide a promising strategy for dynamic charging of electric vehicles, but pavement materials strongly influence transmission efficiency. This study examines the effect of replacing conventional filler with magnetite powder in AC-16 asphalt mixtures. Specimens were prepared with five magnetite substitution levels (0–100%) and three bitumen contents (4.1%, 4.6%, and 5.1%) and were tested under different temperatures (10, 20, and 40 °C), moisture conditions (dry and saturated), and specimen thicknesses. Power transmission was measured with a resonant inductive system at 85 kHz, and both received power variation (RPV) and relative efficiency (RE) were computed. Results showed that magnetite systematically improved electromagnetic performance: RPV increased by up to 13% under dry conditions at 20 °C with 100% magnetite, while RE exhibited smaller variations (−1% to +2%). Moisture reduced RPV, and high temperature (40 °C) caused additional losses, whereas RE remained largely stable. Bitumen contributed indirectly, adding modest RPV gains. Thickness was the dominant geometric factor, with magnetite content particularly effective in mitigating losses at greater depths. Random forest analysis confirmed thickness and magnetite as the most influential variables. These findings demonstrate the potential of magnetite-modified asphalt to enhance the design of WPT-enabled pavements, providing a robust experimental basis for future full-scale applications.
10 February 2026 in Construction and Building Materials