To make wind power more competitive, it is necessary to reduce turbine downtime and reduce costs associated with wind turbine operation and maintenance (O&M). Incorporating machine learning in the development of condition-based predictive maintenance methodologies for wind turbines can enhance their efficiency and reliability. This paper presents a monitoring method that utilizes Density Based Support Vector Machines (DBSVM) and the evolutionary Fourier spectra of vibrations. This method allows for the smart monitoring of the function evolution of the turbine. A complex optimal function (FO) for 5-degree order has been developed that will be the boundary function of the DBSVM to be timely determined from the Fourier spectrum through the magnitude–frequency and place of the failure occurring in the wind turbine drivetrains. The trend of the failure was constructed with the maximal values of the optimal frequency function for both yesthe cases of the upwind and downwind parts of the gearbox.
This article addresses the monitoring and diagnosis of high-speed spindles (HSM) used in CNC grinding machines, emphasizing the importance of the real-time evaluation of their dynamic behavior during commissioning. Due to the complexity of these dynamic phenomena, especially at high speeds (up to 150,000 RPM), common faults such as bearing wear, imbalance, or misalignment can lead to catastrophic failures and high repair costs. An original method is proposed, based on synchronous envelope vibration analysis (SEVA) using the Hilbert transform, to detect mechanical defects in both low-frequency domains (imbalance, mechanical looseness) and high-frequency domains (bearing faults). The system includes vibration, temperature, and speed sensors, and the experimental protocol involves step-by-step monitoring from 10,000 to 90,000 RPM. Through synchronous FFT analysis and IFFT, critical frequencies and their impacts on machining quality are identified. The method enables the accurate fault diagnosis of new or refurbished spindles under real industrial conditions, reducing downtime and production losses. The method involves both local and remote real-time monitoring and diagnosis using a remote data center protocol.
This paper proposes a method to vibration analysis in order to on-line monitoring of milling process quality. Adapting envelope analysis to characterize the milling tool materials is an important contribution to the qualitative and quantitative characterization of milling capacity and a step by modeling the three-dimensional cutting process. An experimental protocol was designed and developed for the acquisition, processing and analyzing three-dimensional signal. The vibration envelope analysis is proposed to detect the cutting capacity of the tool with the optimization application of cutting parameters. The research is focused on Hilbert transform optimization to evaluate the dynamic behavior of the machine/ tool/workpiece.
As the era of Industry 4.0 (i.e., the fourth-generation industrial revolution) develops, machine tools in particular are becoming interconnected, forming a collaborative community in smart factories. “Smart manufacturing” is becoming the norm, in a world where intelligent machines, systems, and networks are able to exchange information between them and respond independently, with autonomy to information, with the goal to manage industrial production processes. An important challenge is the transformation of traditional machines into intelligent machines, respectively intelligent or smart spindle. The purpose of this paper is to analyze the spindle using the intelligent models in in-situ conditions. The historical evolution, recent challenges and future trends of machine tool spindles were analyzed, noting that further development would be necessary to enable sensor/AI module integration to make the spindle unit an inherent quality assurance system. This study proposes a deep learning-based approach to spindle health monitoring based on multi sensor vibration signal analysis. The two proposed AI methods is based on the analysis of acceleration and synchronous envelope vibrations by demodulating the signal based on the Hilbert transform to identify critical bearing defects and specific defects at high frequencies.
Vibrations appearance, either unstability system, is the result of the dynamic interaction of the cutting process with the elastic system of machine tools in various working conditions. Our objective is to develop an experimental three-dimensional dynamic model in milling. Our purpose is to applied this model to optimize the cutting parameters and to monitor cutting process, milling tool and machine-tool. To reach the detailed knowledge of the dynamic phenomena we divide our study into two parts : the machine and the cutting process. The dynamic analysis of the machine is compulsory before modelling the vibratory phenomena during the cutting. A dynamic analysis method is developed to characterize completely the various machine tools components.