Mohammad Karamoozian

Dr. Mohammad Karamoozian


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 February 2020 in International Journal of Coal Preparation and Utilization
Verified
Journal Article
Closed access
HEHossein Ebrahimi
Hossein Ebrahimi
MKMohammad Karamoozian
Mohammad Karamoozian
SSSeyed Fazlolah Saghravani
Seyed Fazlolah Saghravani
Due to the short life of nanobubbles in the pulp, their use in mineral processing, especially in fine grains, is rare. Hence, the use of sustainable nanobubbles with a long lifetime can lead to new results. In addition to the presence of micro-nano bubbles, the ultrasonic emission factor can also have a positive effect on flotation performance. The simultaneous effect of these two factors has not been considered in previous studies. In this study, the stable micro-nano bubbles produced by the hydrodynamic cavitation mechanism were used in the pulp and simultaneously the ultrasonic waves were irradiated. Under these conditions, a wide range of bubbles ranging from 80 nm to 1 mm was generated which caused the flotation of the fine to coarse size particles. Simultaneous use of these two factors showed that the yield of coarse (−850 + 420 µm), medium (−420 + 105 µm) and fine (−105 µm) particles improved by more than 10%, 10%, and 30%, respectively. Combustibles recovery in variable feed ash along with the ash selectivity index were enhanced. In addition, consumption of the collector was reduced up to 90%, while the concentration required for the frother agent was reduced to approximately a quarter.

21 March 2020 in International Journal of Coal Science & Technology
Verified
Journal Article
Open access
PDF file
HEHossein Ebrahimi
Hossein Ebrahimi
MKMohammad Karamoozian
Mohammad Karamoozian
Ultrasonic waves have a lot of use in the particle surface cleaning. As flotation is one of the methods associated with surface properties, this paper investigates the effect of these waves on performance, particle size, reagents, and feed ash content in coal flotation. To accomplish this goal, coal samples in three size fractions, including coarse (− 800 to + 400 µm), medium (− 400 to + 100 µm) and fine (− 100 µm) with various feed ash content. The flotation experiments were evaluated by process indexes such as yield, combustible recovery, and selectivity index. The results indicated the increasing of yield. The increasing was significant in medium size. Furthermore, the results showed that in presence of ultrasonic waves, the collector and frother consumption decreased. And also, applying ultrasonic waves would result more combustible recovery and selectivity index. The ash selectivity index had the highest impact for high feed ash content.

22 February 2020 in SN Applied Sciences
Verified
Journal Article
Closed access
PDF file
ESEbrahim Shahrivar
Ebrahim Shahrivar
MKMohammad Karamoozian
Mohammad Karamoozian
MGMahdi Gharabaghi
Mahdi Gharabaghi

1 June 2018
Verified
Open access
PDF file
SSS. Shahraki
S. Shahraki
MKMohammad Karamoozian
Mohammad Karamoozian
AAA. Azizi
A. Azizi
Sulfur is one of the most significant impurities in coal, which reduces the quality of coal and also results in environmental pollution. This work was aimed to investigate the removal of sulfur from coal by the leaching method employing parameters expected to affect the removal rate such as acid concentration (10-30%), temperature (40-80 degrees C), and reaction time (40-100 min). A response surface methodology using Box-Behnken design was employed to maximize, model, and evaluate the factors affecting the desulfurization process. The results obtained indicated that the desulfurization value increased with increase in the acid concentration, temperature, and reaction time. A quadratic model with a high correlation coefficient (R-2=0.98) is proposed and developed for the relationship between the removal value and the influential factors. The modeling results demonstrated that the significance degree of factors was in the order of acid concentration>temperature>reaction time. It was also found that the maximum desulfurization (about 87%) could be obtained under the optimal conditions of acid concentration=25%, temperature=80 degrees C, and leaching time=84 minutes.

23 December 2019 in Minerals
Verified
Journal Article
Open access
PDF file
Mohammadreza Heydartaemeh, CSci, FIMMMMohammadreza Heydartaemeh, CSci, FIMMM
Mohammadreza Heydartaemeh, CSci, FIMMM
MKMohammad Karamoozian
Mohammad Karamoozian
Herman PotgieterHerman Potgieter
Herman Potgieter
Problems relating to the abrasion of equipment is one of the most important issues in mining and associated industries. Hardening is a method of protecting metal equipment, metal tools, or important components against erosion, corrosion, and abrasion. This can be achieved by welding a thin layer of abrasion-resistant metal onto the surface of the work piece. The useful life of a piece of equipment or parts can be significantly increased by applying abrasion-resistant coatings, thereby reducing repair or replacement costs associated with damaged parts. This process is inexpensive in the production of parts and is often economically justifiable. This study focuses on measuring the abrasion resistance of a nano high-entropy alloy against copper oxide and high-grade iron ores. When a base alloy was coated with the nano high-entropy alloy, the abrasion indexes of iron and copper ores decreased from 0.0001647 kg to 0.0000908 kg and from 0.0001472 kg to 0.0000803 kg, respectively. The standard deviation, repeatability, and reproducibility were calculated for the alloy steel blade covered with nano high entropy alloy (N-HEA), producing values of 0.00016, 0.00047, and 0.00040, respectively, while a standard alloy steel blade exhibited values of 0.0003, 0.00047, and 0.00042, respectively. High-entropy alloys and high-entropy nano-alloys have not been used as practical coatings in the mineral industry in any form to date. Utilizing high-entropy nano-alloys in this industry would introduce innovative alternatives for customers, thereby increasing competitive advantages and providing international markets and customers = with the most efficient choices of operational materials.

1 January 2022 in Rudarsko-geološko-naftni zbornik
Verified
Journal Article
Closed access
PDF file
NKNarjes Khorasanizadeh
Narjes Khorasanizadeh
MKMohammad Karamoozian
Mohammad Karamoozian
HNHossein Nouri-Bidgoli
Hossein Nouri-Bidgoli
The effect of initial bubble diameter on the bubble motion pattern in a flotation column has been studied by the two-phase computational fluid dynamics (CFD) method. The two-phase simulations have been done using the volume of a fluid (VOF) model in ANSYS (R) Fluent (R) software. The computational field was a square cross-section column with a width of o.i m and a height of 1 m into which air was interred as a single bubble from the lower part of the column by an internal sparger. An experimental test has been also performed and the simulated results have been validated using the values obtained for the bubble rise velocity. A comparison of the simulation and the experimental results has confirmed that CFD can predict the bubble rise velocity profile and its value in the flotation column less than 5% relative to the experimental values. Then the simulations have been repeated with a 20% decrease and increase in the initial bubble diameter to investigate the effect of bubble diameter on the bubble flow pattern. The investigations have shown that as the bubble diameter increases, the velocity decreases and the bubble rises in a more zigzag direction as a result of two counter-rotating trailing vortices behind the bubble increasing.