In order to prevent the multi-dynamic disasters induced by rock burst and roof water inrush in strong rock burst coal seams under multi-aquifers, such as is the case with the 207 working face in the Tingnan coal mine considered in this study, the exhibited characteristics of two types of dynamic disasters, namely rock burst and water inrush, were analyzed. Based on the lithology and predicted caving height of the roof, the contradiction between rock burst and water inrush was analyzed. In light of these analyses, an integrated method, roof pre-splitting at a high position and shattering at a low position, was proposed. According to the results of numerical modelling, pre-crack blasting at higher rock layers enables a cantilever roof cave in time, thereby reducing the risk of rock burst, and pre-crack blasting at underlying rock layers helps increase the crushing degree of the rock, which is beneficial for decreasing the caving height of rock layers above goaf, thereby preventing the occurrence of water inrush. Finally, the proposed method was applied in an engineering case, and the effectiveness of this method for prevention and control of multi-dynamics disasters was evaluated by field observations of the caving height of rock layers and micro-seismic monitoring. As a result, the proposed method works well integrally to prevent and control rock burst and water inrush.

In the process of coal mining, coal and gas outburst is one of the most severe disasters, which is accompanied by the outbursts of CO₂, CH₄, N₂, and other gases. Since the intensity of the outburst is affected by the adsorption characteristics of different gases, the study of the adsorption characteristics of multi-gas in the coal body is of great significance for the prevention and control of coal and gas dynamical outbursts in coal mining. In this paper, the self-developed adsorption-instantaneous pressure relief test system for gas-containing coal was used to study the damage characteristics of multi-gas in briquette adsorption-instantaneous pressure relief and to characterize coal adsorption expansion deformation and instantaneous pressure relief deformation quantitatively. The results showed that under the same temperature and pressure conditions, the adsorption expansion deformation capacities of different gases were in the order of CO₂ > CH₄ > N₂. With the increasing pressure of pressure relief, the damage of the coal body tended to be more significant. Although the briquette exhibited isotropic mechanical properties, the process of adsorption expansion deformation was not completely consistent with the isotropy of deformation, in which the axial strain was slightly larger than the radial strain. Moreover, it was found that the adsorption equilibrium time was positively correlated with gas pressure and gas adsorption characteristics.

In order to address the issue of inadequate negative pressure distribution in the gas extraction pipeline network and to enhance the efficiency of gas extraction, a study was conducted on the mechanisms of mutual influence between various branches within the gas extraction pipeline network. Using graph theory principles, a gas extraction network graph was built, and the gas extraction pipeline network was solved through the assignment adjustment iterative method. The study summarizes the sensitivity analysis of various control parameters, regulation patterns of branch valves and extraction pump control parameters at different network positions, and the impact of time parameters on the network’s operational conditions. Based on the solution results, an intelligent gas extraction control strategy was proposed. The results indicate that, under safety and efficiency constraints, gas concentration increased by approximately 11%, and gas purity increased by 0.3 m³/min, resulting in a 4.7% improvement after the implementation of intelligent control. The overall performance of the pipeline network was significantly enhanced. These research findings are of great significance for achieving efficient gas extraction.