SRAM-based in-memory computing (IMC) is a promising approach to overcome the bottleneck of traditional Von Neumann architectures that suffer from data transfer delay and energy inefficiency. Aging phenomena and process variations are a serious reliability and lifetime concern that may impact SRAM-based IMC array architectures, similar to conventional SRAM arrays. Bias temperature instability (BTI) is a dominant aging mechanism that degrades transistor performance and negatively affects the analog nature of the IMC computations. In this work, we present a simulation framework for the joined analysis of aging and process variation influence on IMC reliable operation. We perform, through SPICE simulations, an extensive BTI aging analysis on differential input SRAM-based IMC array architectures under different operating conditions and considering process variations. The simulation results show a substantial impact of aging on their reliability. Furthermore, we present an aging mitigation technique to maintain reliability and extend the lifetime of these circuits. Aging mitigation is achieved by periodically reconfiguring the active current paths in the IMC cells, with negligible cost on throughput and power consumption. The simulation results show that up to 68% of the IMC circuits can lose accuracy after three operating years, depending on the operating conditions. The aging mitigation technique effectively reduces the percentage of circuits that lose accuracy by up to 72% and decreases their degradation rate, essentially extending by more than $9.3\times $ their reliable lifetime.
Bias Temperature Instability (BTI)-induced aging of transistors is a serious concern in modern electronic circuits, yet its effects on the operation of mixed-signal circuits have not been extensively studied. In this work, initially we analyze how BTI-induced aging degradation influences the analog front end of Flash analog-to-digital converters (ADCs). BTI-induced aging leads to substantial increments in the offset voltage of the ADC comparators, which in turn affect their trip point voltage, leading to the alteration of the ADC’s performance characteristics, such as gain, full-scale error and integral nonlinearity. Thus, erroneous responses are generated. Next, we propose a low-cost BTI-induced aging mitigation technique based on a circuit reconfiguration method which periodically alters the average voltage stress on the ADC comparators’ transistors. The proposed method limits the comparators’ offset voltage development, restricting the shift in their trip point voltage. Consequently, the impact of aging on the performance characteristics of the ADC is drastically reduced, and its reliability is improved. According to our simulations, after two years of operation, the gain error is reduced by 95.43%, the full-scale error is reduced by 63.31% and the integral nonlinearity is reduced by 63.00%, with respect to operation without applying the proposed aging mitigation technique.