The main objective of this study is to demonstrate and implement a cost-effective system for low-strength municipal wastewater treatment in rural areas. An integrated compact anaerobic treatment pilot plant unit was designed, constructed and operated for almost two years. The pilot plant consists of three successive compartments mainly: primary sedimentation (PS), packed bed upflow anaerobic sludge blanket (P-UASB) and inclined plate settler. The pilot plant was operated continuously at a hydraulic loading rate of 6 m3/day, average organic loading rate of 2.03 kg COD/m3/day and average retention time of 4 h at the P-UASB and a total retention time 6 h for the integrated treatment unit. The performance of the treatment train was monitored via physicochemical as well as bacteriological and parasitological analysis. The average removal rates of chemical oxygen demand, biological oxygen demand and total suspended solids were 78, 79 and 91%, respectively, with corresponding average residual values of 71 mgO2/L, 39 mgO2/L and 18 mg/L. Bacterial analysis indicated that great majorities were removed but still some residuals exist. The treated wastewater, after disinfection, was complying with the Egyptian Code for wastewater reuse in restricted irrigation. The results indicated that the total life cost of the pilot plant, during the research period, proved to be a cost-effective process for treating low-strength wastewater.
Throughout the industrial activities, water consumption is increased, resulting in large amounts of wastewater that must be treated before being discharged into the water streams. Coagulation/flocculation and sedimentation processes are considered as one of the most used chemical treatment methods for removing the majority of water contaminants. Cationic dye of methylene blue (MB) and anionic dye of methyl orange (MO) are common hazardous organic wastewater contaminants that mostly degraded by different chemical coagulants processes. Chemical coagulants act as an auxiliary agent in the coagulation/flocculation-sedimentation process. This study aimed to investigate the effectiveness of combined chemical coagulants of FeCl3/lime in the degradation of cationic and anionic dyes. In this work, kinetics, effect of adsorption parameters such as pH, initial concentration of dyes and the chemicals coagulants doses was studied. At an optimum coagulant dosage of (200/70) mg/L and (70/100) mg/L, and optimum pH ranged from (6.0 - 8.0) for MO and MB, repectively . The achieved removal values for both anionic and cationic dyes using the combined coagulant (FeCl3/lime) were 97.78% and 95.54% for MO and MB, respectively. The maximum adsorption capacity of FeCl3/ lime was calculated from the isotherm at 500 mg/g. This technique was successfully conducted for the treatment of tannery and laundry wastewaters for improving the quality of pollution parameters and investigating the efficiency of the applied treatment technique. The achieved removal efficiencies for tannery and laundary wastewater ranged from 93.9 to 94.4 % for COD, 92.9 to 92.5% for BOD5 , 93.7 to 92.8% for TSS, and 96.7 to 99.2% for turbidity, respectively.