The human skin hosts an array of sensors that are capable of detecting and interpreting many traits important to how we function and survive. The goal of mimicking this capability in composites to create intelligent composite materials has led to the development of a bio-inspired stretchable network composed of numerous micro-fabricated sensors capable of detecting multiple stimuli. The components of the network are small scale and flexible making the network embeddable within complexly shaped composite layups and flexible structures with minimal impact on the host structure. This paper outlines recent progress in ongoing work to develop the bio-inspired network in order to create intelligent composite materials.
The adhesion strength of thin films is critical to the durability of micro and nanofabricated devices. However, current testing methods are imprecise and do not produce quantitative results necessary for design specifications. The most common testing methods involve the manual application and removal of unspecified tape. This overcome many of the challenges of connecting to thin films to test their adhesion properties but different tapes, variation in manual application, and poorly controlled removal of tape can result in wide variation in resultant forces. Furthermore, the most common tests result in a qualitative ranking of film survival, not a measurement with scientific units. This paper presents a study into application and peeling parameters that can cause variation in the peeling force generated by tapes. The results of this study were then used to design a test methodology that would control the key parameters and produced repeatable quantitative measurements. Testing using the resulting method showed significant improvement over more standard methods, producing measured results with reduced variation. The new method was tested on peeling a layer of paint from a PTFE backing and was found to be sensitive enough to register variation in force due to differing peeling mechanisms within a single test.
Structural health monitoring (SHM) is a technology striving to enable automated evaluation of the health condition of structures. The SHM has recently attracted significant attention in the aerospace and civil infrastructure industries because of its potential to improve operational efficiency, reduce maintenance costs, and enhance the structural reliability in a real-time operation basis. The SHM is developing to include multiple types of sensors and even onboard processing for diagnostics and decision making. Advanced multidisciplinary engineering and manufacturing technologies are being developed enabling integration of sensors, network hardware, and semiconductors into structures with minimal parasitic effects. This is precisely the foundation for developing intelligent structures. This paper highlights recent developments in microfabricated expandable sensor networks for the SHM and intelligent structures at Stanford University. Fabrication and testing of microfabricated ultrasonic and temperature sensing systems in expandable networks are discussed. These advances applied to the SHM and intelligent structures support a paradigm change in design, manufacturing, and maintenance of structures. Successful implementation of the SHM will require a close collaborative effort among academia, government, and industry.
Significant progress has recently been achieved in structural health monitoring, maturing the technology through quantification, validation, and verification to promote implementation and fielding of SHM. In addition, there is ongoing work seeking to detect damage precursors and to deploy structural health monitoring systems over large areas, moving the technology beyond hot-spot monitoring to global state sensing for full structural coverage. A large number of small sensors of multiple types are necessary in order to accomplish the goals of structural health monitoring, enabling increased sensing capabilities while reducing parasitic effects on host structures. Conventional sensors are large and heavy, adding to the weight of a structure and requiring physical accommodation without adding to and potentially degrading the strength of the overall structure. Increased numbers of sensors must also be deployed to span large areas while maintaining or increasing sensing resolution and capabilities. Traditionally, these sensors are assembled, wired, and installed individually, by hand, making mass deployment prohibitively time consuming and expensive. In order to overcome these limitations, the Structures and Composites Lab at Stanford University has worked to develop bio-inspired microfabricated stretchable sensor networks. Adopting the techniques of complementary metal-oxide semiconductor and microelectromechanical system fabrication, new methods are being developed to create integrated networks of large numbers of various micro-scale sensors, processors, switches, and all wiring in a single fabrication process. Then the networks are stretched to span areas orders of magnitude larger than the original fabrication area and deployed onto host structures. The small-scale components enable interlaminar installation in laminar composites or adhesive layers of built-up structures while simultaneously minimizing parasitic effects on the host structure. Additionally, data processing and interpretation capabilities could be embedded into the network before material integration to make the material truly multifunctional and intelligent once fully deployed. This article reviews the current accomplishments and future vision for these systems in the pursuit of state sensing and intelligent materials for self-diagnostics and health monitoring.