This paper reviews the progress of AlGaN-based deep-ultraviolet (DUV) light emitting diodes (LEDs), mainly focusing in the work of the authors’ group. The background to the development of the current device structure on sapphire is described and the reason for using a (0001) sapphire with a miscut angle of 1.0° relative to the m-axis is clarified. Our LEDs incorporate uneven quantum wells (QWs) grown on an AlN template with dense macrosteps. Due to the low threading dislocation density of AlGaN and AlN templates of about 5 × 108/cm2, the number of nonradiative recombination centers is decreased. In addition, the uneven QW show high external quantum efficiency (EQE) and wall-plug efficiency, which are considered to be boosted by the increased internal quantum efficiency (IQE) by enhancing carrier localization adjacent to macrosteps. The achieved LED performance is considered to be sufficient for practical applications. The advantage of the uneven QW is discussed in terms of the EQE and IQE. A DUV-LED die with an output of over 100 mW at 280–300 nm is considered feasible by applying techniques including the encapsulation. In addition, the fundamental achievements of various groups are reviewed for the future improvements of AlGaN-based DUV-LEDs. Finally, the applications of DUV-LEDs are described from an industrial viewpoint. The demonstrations of W/cm2-class irradiation modules are shown for UV curing.
26 May 2017 in Japanese Journal of Applied Physics
AlGaN-based LEDs (λ < 300 nm) fabricated on n-AlGaN templates with a threading dislocation density larger than 5 × 10 8 /cm 2 , which were grown on (0001) sapphire with a 1.0° miscut relative to the m -plane, showed external quantum efficiencies (EQEs) of 3.5, 3.9, 6.1, and 6.0% at 266, 271, 283, and 298 nm, respectively. These EQE values reveal significantly high internal quantum efficiencies (IQEs). This performance was obtained using an uneven multiple quantum well (MQW) grown on the AlGaN template with macrosteps having height larger than the well thickness. The electroluminescence spectra of the fabricated LEDs using this MQW structure shifts to a longer wavelength compared with those on sapphire with a miscut angle of 0.3° relative to the m -plane. Furthermore, the LEDs with this MQW show no deleterious effect on the lifetime, broader electroluminescence spectral widths, and higher output powers when using sapphire with a miscut of 1.0°.
4 July 2016 in Japanese Journal of Applied Physics
To replace mercury lamps with AlGaN-based deep-ultraviolet (DUV) LEDs, a simple and low-cost package with increased light extraction efficiency (LEE) is indispensable. Therefore, resin encapsulation is considered to be a key technology. However, the photochemical reactions induced by DUV light cause serious problems, and conventional resins cannot be used. In the former part of this study, a comparison of a silicone resin and fluorine polymers was carried out in terms of their suitability for encapsulation, and we concluded that only one of the fluorine polymers can be used for encapsulation. In the latter part, the endurance of encapsulation using the selected fluorine polymer was investigated, and we confirmed that the selected fluorine polymer can guarantee a lifetime of over 6,000 h at a wavelength of 265 nm. Furthermore, a 3 × 4 array module of encapsulated dies on a simple AlN submount was fabricated, demonstrating the possibility of W/cm2-class lighting.
The origin of the fast modulation characteristics of deep ultraviolet (DUV) AlGaN light-emitting diodes (LEDs) grown on AlN/sapphire templates with vicinal off-angles is reported by employing time-resolved electroluminescence (EL) and micro-imaging experiments. The LEDs have recently demonstrated Gbps-class optical wireless communication (OWC) under both room-lighting and direct-sun. The frequency response (f3dB) of the LED reached 184 MHz, which is far beyond expectations by considering the size of the LEDs. Since self-organized micro-LED structures with a low electric capacitance (C) are observed by the EL experiments, the compatibility of high efficiency and fast modulation nature of the AlGaN LEDs is explained. Our approach can overcome the dilemma, where micro-LEDs can be modulated fast but have low power, and therefore, the self-organized micro-LED structure is an ideal solution to realize practical DUV OWCs.
To clarify the behavior of the AlGaN in 20 nm wide Ga-rich current pathways in an n-AlGaN layer, which assists carrier localization in AlGaN-based light-emitting diodes, we performed a detailed analysis using an n-Al0.7Ga0.3N layer on AlN with dense macrosteps on a 1.0° miscut sapphire substrate. Energy-dispersive X-ray spectra, obtained using cross-sectional scanning transmission electron microscopy calibrated by Rutherford backscattering and cross-sectional cathodoluminescence spectra, indicated that AlN mole fraction in the Ga-rich current pathways was nearly ~2/3. This result is consistent with those of other research groups, suggesting that metastable Al2/3Ga1/3N is created in Ga-rich current pathways.
Ga-rich zones created along macrosteps in n-AlGaN plausibly function as electron pathways of AlGaN-based deep-ultraviolet (DUV) LEDs fabricated on AlN templates using 1.0°-miscut c(0001) sapphire substrates toward the m[1-100] axis. This work was performed to clarify AlN mole fractions (xAl) of Ga-rich zones. xAl ≃ (7/12, 6/12, and 5/12) was observed in Ga-rich zones in AlαGa1−αN (α ≃ 0.63, 0.55, and 0.43, respectively) by the method proposed in our previous article in which we showed that Ga-rich zones of Al8/12Ga4/12N were created in Al0.7Ga0.3N. xAl in the Ga-rich zones obtained from an energy-dispersive x-ray signal by scanning transmission electron microscopy calibrated by Rutherford backscattering well agreed with xAl obtained by cross-sectional cathodoluminescence (CL) spectroscopy using scanning electron microscopy. A weak CL shoulder peak corresponding to Al4/12Ga8/12N was also observed for Al0.43Ga0.57N. In addition, xAl ≃ n/12 (n = 6–9) in Al-rich zones appeared in the rest of the Ga-rich zones. Furthermore, nanobeam electron diffraction patterns of the Ga-rich zones indicated a high possibility of a regular configuration of Ga and Al atoms on the c(0001) plane in our samples. Consequently, xAl values in nonflat AlGaN layers with macrosteps were often determined to be near n/12 (n: integer). Thus, Ga-rich zones (xAl = n/12: n = 4–8) formed in our nonflat AlGaN layers, which originated from the macrosteps along [11–20] edgelines normal to the m[1–100] axis, are suggested to be metastable. The creation of discrete xAl in Ga-rich zones should contribute to the stable production of DUV-LEDs using high-miscut sapphire substrates.