Tengjiao Hong

Dr. Tengjiao Hong


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 January 2025 in Materials
Verified
Journal Article
Open access
PDF file
THTengjiao Hong
Tengjiao Hong
DHDong Huang
Dong Huang
FDFengjuan Ding
Fengjuan Ding
LZLiyong Zhang
Liyong Zhang
FDFulong Dong
Fulong Dong
LCLei Chen
Lei Chen
Many factors affect the quality of the injection molding of plastic products, including the process parameters, mold materials, type and geometry of plastic parts, cooling system, pouring system, etc. A multi-objective optimization method for injection molding process parameters based on the BP neural network and NSGA-II algorithm is proposed to address the problem of product quality defects caused by unreasonable process parameter settings. Taking the junction box shell as the object, numerical simulation was carried out using Moldflow2019 software and a six-factor five-level orthogonal experiment was designed to explore the influence of injection molding process parameters, such as the mold temperature, melt temperature, injection pressure, holding pressure, holding time, and cooling time, on the volume shrinkage rate and warpage deformation of the junction box. Based on a numerical simulation, the BP neural network and NSGA-II algorithm were used to optimize the optimal combination of injection molding process parameters, volume shrinkage rate, and warpage deformation. The research results indicate that the melt temperature has the most significant impact on the quality of the injection molding of junction boxes, followed by the holding time, holding pressure, cooling time, injection pressure, and mold temperature. After optimization using the BP neural network and the NSGA-II algorithm, the optimal process parameter combination was obtained with a melt temperature of 230.03 °C, a mold temperature of 51.27 °C, an injection pressure of 49.13 MPa, a holding pressure of 69.01 MPa, a holding time of 15.48 s, and a cooling time of 34.91 s. At this time, the volume shrinkage rate and warpage deformation of the junction box were 6.905% and 0.991 mm, respectively, which decreased by 33.2% and 3.8% compared to the average volume shrinkage rate (10.34884%) and warpage deformation (1.030764 mm) before optimization. The optimization effect was significant. In addition, the errors between the volume shrinkage rate and warpage deformation predicted by BP-NSGA-II and the simulated values using Moldflow software were 1.9% and 3.4%, respectively, indicating that the optimization method based on the BP neural network model and NSGA-II algorithm is reliable.

29 April 2022 in Materials
Verified
Journal Article
Open access
PDF file
FDFengjuan Ding
Fengjuan Ding
THTengjiao Hong
Tengjiao Hong
Youlin XuYoulin Xu
Youlin Xu
XJXiangdong Jia
Xiangdong Jia
To determine the Gurson-Tvergaard-Needleman (GTN)damage model parameters of 6061 aluminum alloy after secondary heat treatment, the uniaxial tensile test was carried out on the aluminum alloy circular arc specimen, and the mechanical properties parameters and the load-displacement curve of aluminum alloy tube were obtained. With the help of the finite element reverse method, scanning electron microscope and a orthogonal test method, the GTN damage model parameters (f0, fN, fC, and fF) were calibrated, and their values were 0.004535, 0.04, 0.1, and 0.2135, respectively. Then the shear specimen and notch specimen were designed to verify the damage model, the results show that the obtained GTN damage model parameters can effectively predict the fracture failure of 6061 aluminum alloy after secondary heat treatment during the tensile process.

12 March 2023 in Crystals
Verified
Journal Article
Open access
PDF file
THTengjiao Hong
Tengjiao Hong
FDFengjuan Ding
Fengjuan Ding
FCFeng Chen
Feng Chen
HZHua Zhang
Hua Zhang
QZQiliang Zeng
Qiliang Zeng
JWJuan Wang
Juan Wang
To study the deformation and fracture mechanism of 6061 aluminum alloy extruded pipe after secondary heat treatment under different stress triaxiality, a Johnson–Cook failure model was developed. Through the FEM method and SEM, the fracture mechanism of different types of aluminum alloy tensile specimens was analyzed. The research results show that the Johnson–Cook failure model could better simulate the tensile deformation of 6061 aluminum alloy specimens of different types, the parameters of the Johnson–Cook failure model were finally obtained D1 = 0.29, D2 = 1.356, and D3 = −2.567. With the increase of the stress triaxiality, the fracture strain showed a decreasing trend as a whole, and the fracture mechanism changed from a shear type to a hole aggregation type. The stress triaxiality gradually decreased with the increase of the notch radius/angles of the aluminum alloy notch specimen, and the stress triaxiality at the center of the notch was higher than the stress triaxiality at the root of the notch.

27 July 2023 in Crystals
Verified
Journal Article
Open access
PDF file
THTengjiao Hong
Tengjiao Hong
FDFengjuan Ding
Fengjuan Ding
FCFeng Chen
Feng Chen
HZHua Zhang
Hua Zhang
QZQiliang Zeng
Qiliang Zeng
JWJuan Wang
Juan Wang
During the service process of an aluminum alloy structure, its complex deformation zone experiences repeated loading problems such as repeated tension, compression, bending and reverse bending. At the same time, the cyclic loading and heat treatment process also have a certain impact on the mechanical properties of aluminum alloy extruded tubes. Therefore, the study of heat treatment process parameters has important engineering and practical value for the mechanical properties of aluminum alloy extrusion tubes under cyclic loading conditions. The experiment takes 6061-T6 aluminum alloy extruded tubes as the research objects. In the study, heat treatment and cyclic tensile tests were carried out on 26 aluminum alloy specimens to study the effects of different heat treatment parameters (such as heating temperature, holding time, and cooling method) on the stress–strain hysteresis curves, stress characteristics, hysteretic energy, skeleton curves and failure characteristics of the alloy under the same loading system. In addition, different cyclic tensile tests were carried out on 20 aluminum alloy samples without secondary heat treatment to discuss the effects of different cyclic loading regimes on the mechanical properties of the alloy. The research results indicate that the effect of heating temperature on the cyclic loading performance of the alloy is greater than that of the holding time, and the effect of the cooling method on the cyclic loading performance of the alloy is not obvious. A cyclic tensile loading regime has a significant impact on the strength, elongation and hysteresis energy of the alloy. The hysteretic behavior of the alloy during cyclic tensile loading depends on the applied stress level and loading history. As the number of cycles increases, the shape of the hysteresis curve tends to be stable, but there is no monotonic relationship between the number of cycles loaded and the hysteresis energy.

31 July 2025 in Crystals
Verified
Journal Article
Open access
PDF file
FDFengjuan Ding
Fengjuan Ding
THTengjiao Hong
Tengjiao Hong
FDFulong Dong
Fulong Dong
DHDong Huang
Dong Huang
The constitutive model is widely employed to characterize the rheological properties of metallic materials under high-temperature conditions. It is typically derived from a series of high-temperature tests conducted at varying deformation temperatures, strain rates, and strains, including hot stretching, hot compression, separated Hopkinson pressure bar testing, and hot torsion. The original experimental data used for establishing the constitutive model serves as the foundation for developing phenomenological models such as Arrhenius and Johnson–Cook models, as well as physical-based models like Zerilli–Armstrong or machine learning-based constitutive models. The resulting constitutive equations are integrated into finite element analysis software such as Abaqus, Ansys, and Deform to create custom programs that predict the distributions of stress, strain rate, and temperature in materials during processes such as cutting, stamping, forging, and others. By adhering to these methodologies, we can optimize parameters related to metal processing technology; this helps to prevent forming defects while minimizing the waste of consumables and reducing costs. This study provides a comprehensive overview of commonly utilized experimental equipment and methods for developing constitutive models. It discusses various types of constitutive models along with their modifications and applications. Additionally, it reviews recent research advancements in this field while anticipating future trends concerning the development of constitutive models for high-temperature deformation processes involving metallic materials.

1 January 2025 in Computers, Materials & Continua
Verified
Journal Article
Open access
PDF file
FDFengjuan Ding
Fengjuan Ding
LSLu Suo
Lu Suo
THTengjiao Hong
Tengjiao Hong
FDFulong Dong
Fulong Dong
DHDong Huang
Dong Huang
The complex phenomena that occur during the plastic deformation process of aluminum alloys, such as strain rate hardening, dynamic recovery, recrystallization, and damage evolution, can significantly affect the properties of these alloys and limit their applications. Therefore, studying the high-temperature flow stress characteristics of these materials and developing accurate constitutive models has significant scientific research value. In this study, quasi-static tensile tests were conducted on 5754 aluminum alloy using an electronic testing machine combined with a high-temperature environmental chamber to explore its plastic flow behavior under main deformation parameters (such as deformation temperatures, strain rates, and strain). On the basis of true strain-stress data, a BP neural network constitutive model of the alloy was built, aiming to reveal the influence laws of main deformation parameters on flow stress. To further improve the model performance, the ant colony optimization algorithm is introduced to optimize the BP neural network constitutive model, and the relationship between the prediction stability of the model and the parameter settings is explored. Furthermore, the predictability of the two models was evaluated by the statistical indicators, including the correlation coefficient (R2), RMSE, MAE, and confidence intervals. The research results indicate that the prediction accuracy, stability, and generalization ability of the optimized BP neural network constitutive model have been significantly enhanced.