Winarno Winarno

Mr. Winarno Winarno

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 October 2025 in Resources
Verified
Journal Article
Open access
PDF file
FMFanny Meliani
Fanny Meliani
RSReni Sulistyowati
Reni Sulistyowati
ESElenora Gita Alamanda Sapan
Elenora Gita Alamanda Sapan
LSLena Sumargana
Lena Sumargana
SLSopia Lestari
Sopia Lestari
BSBayu Sutejo
Bayu Sutejo
The Bekasi River Basin is highly vulnerable to severe and recurrent flooding, as evidenced by significant infrastructure and environmental damage during major events. This study investigates the catastrophic floods of 2016, 2020, 2022, and 2025 by implementing the Rainfall-Runoff-Inundation (RRI) model to simulate key hydrological processes. After validation using historical water level data, the model performed effectively, achieving the highest coefficient of determination (R2 = 0.75) and lowest root mean square error (RMSE = 0.66) at Cileungsi Station. In contrast, the lowest R2 = 0.02, and the highest RMSE = 3.74 at Pondok Gede Permai (PGP) Station. The results reveal a concerning trend of worsening 5-year flood events, with the 2025 flood reaching a peak inundation depth exceeding 3 m and affecting an area of 2.97 km2, caused by a rainfall threshold of more than 180 mm/day. Furthermore, the model shows a rapid hydrological response, with a time lag of approximately 7 h or less between peak rainfall and flood onset across three monitoring stations. Analysis indicates these severe floods were primarily triggered by heavy rainfall combined with significant land cover changes. The findings provide valuable insights for flood prediction and mitigation strategies in this vulnerable region.

22 November 2022
Verified
Conference Paper
Open access
RORosyidi
Rosyidi
WWWinarno Winarno
Winarno Winarno
NPNurhadi Pramana
Nurhadi Pramana
NNNofriyadi Nurdam
Nofriyadi Nurdam
TWTri Widodo
Tri Widodo
SBSahid Bismantoko
Sahid Bismantoko
In the Intelligent Transportation System (ITS) era, several studies related to traffic flow prediction models on the road made it easier to obtain continuous traffic volume data, traffic volume on roads was strongly influenced, one of them by damaged road conditions. This research is related to the development of a traffic flow prediction model due to damaged roads. In developing the traffic flow prediction model for the characteristics of damaged roads (distress raveling type) using the Auto Regressive Integrated Moving Average (ARIMA) and Long Short Term Memory (LSTM) models, these two models are suitable for short-term traffic flow prediction models using Mean Absolute Error (MAE) and Root Mean Square Error (RMSE) evaluation methods. The results obtained in the development of this model are quite promising to provide an overview of the traffic flow prediction model for the characteristics of damaged roads (distress raveling type) at the survey location. The evaluation shows that RMSE or MAE values for SARIMA and LSTM are less than 5%.

24 November 2023 in Automotive Experiences
Verified
Journal Article
Open access
PDF file
DKDjoko Wahyu Karmiadji
Djoko Wahyu Karmiadji
MRM. Rosyidi
M. Rosyidi
TWTri Widodo
Tri Widodo
HZHarris Zaenal
Harris Zaenal
NNNofriyadi Nurdam
Nofriyadi Nurdam
WWWinarno Winarno
Winarno Winarno
Identification of road profiles is needed to provide the input of automotive simulation and endurance testing. The analysis with estimation methods is mostly done to identify road profiles. The main goal of analysis methods is to obtain the data of vertical displacements due to road profile measurement. The acceleration data is obtained from measuring road profile by using 4 sensors of accelerometer placed on each car wheel. The measuring data is converted to be vertical displacement data by using a "double integrator", however, it is not easy to get accurate results since the signal obtained carries a lot of noise and it is necessary to design the right filter reduce the noise. In this study, the signal filtering methods reducing the noise were used Fast Fourier Transform (FFT) and Kalman Filter (KF) combination. Experiments were carried out by combining Fast Fourier Transform and Kalman Filters using an input signal with unit (volt) in the time domain. In addition, this research focused on preparing the survey data that has been obtained by eliminating the noise to convert becoming the displacement input data for providing the loads of automotive simulation testing.