In the present review, the effect of porosity on the mechanical properties of the fabricated parts, which are additively manufactured by powder bed fusion and filament extrusion-based technologies, are discussed in detail. Usually, additive manufacturing (AM) processes based on these techniques produce the components with a significant amount of pores. The porosity in these parts typically takes two forms: pores with irregular shapes (called keyholes) and uniform (spherical) pores. These pores are present at different locations, such as surface, sub-surface, interior bulk material, between the deposited layers and at filler/matrix interface, which critically affect the corrosion resistance, fatigue strength, stiffness, mechanical strength, and fracture toughness properties, respectively. Therefore, it is essential to study and understand the influence of pores on the mechanical properties of AM fabricated parts. The technologies of AM can be employed in the manufacturing of components with the desired porous structure through the topology optimization process of scaffolds and lattices to improve their toughness under a specific load. The undesirable effect of pores can be eliminated by using defects-free raw materials, optimizing the processing parameters, and implementing suitable post-processing treatment. The current review grants a more comprehensive understanding of the effect of porous defects on mechanical performance and provides a mechanistic basis for reliable applications of additively manufactured components.

Natural composites can be fabricated through reinforcing either synthetic or bio-based polymers with hydrophilic natural fibers. Ultimate moisture absorption resistance at the fiber–matrix interface can be achieved when hydrophilic natural fibers are used to reinforce biopolymers due to the high degree of compatibility between them. However, the cost of biopolymers is several times higher than that of their synthetic counterparts, which hinders their dissemination in various industries. In order to produce economically feasible natural composites, synthetic resins are frequently reinforced with hydrophilic fibers, which increases the incompatibility issues such as the creation of voids and delamination at fiber–matrix interfaces. Therefore, applying chemical and/or physical treatments to eliminate the aforementioned drawbacks is of primary importance. However, it is demonstrated through this review study that these treatments do not guarantee a sufficient improvement of the moisture absorption properties of natural composites, and the moisture treatments should be applied under the consideration of the following parameters: (i) type of hosting matrix; (ii) type of natural fiber; (iii) loading of natural fiber; (iv) the hybridization of natural fibers with mineral/synthetic counterparts; (v) implantation of nanofillers. Complete discussion about each of these parameters is developed through this study.