The first offshore methane-hydrate production test was conducted in the Eastern Nankai Trough area of Japan in 2013, subjecting a gas-hydrates reservoir to large drawdowns by reducing bottomhole pressure (BHP) for in-situ dissociation of gas hydrates. This pioneering test has proved the feasibility of the depressurization method through demonstration of gas production from a deepwater gas-hydrates reservoir. Approximately 119 500 std m3 of gas was produced during a continuous flow period of 6 days. However, reservoir response to a range of drawdown conditions was not attainable, which is important for reservoir evaluation, because drawdown became uncontrollable after unintended water production through the gas line occurred. Gas and water released from the dissociation of gas hydrates were separated by use of a downhole gas-separation system. The separated gas and water were produced to surface by means of two dedicated gas and water lines. Drawdown was executed by pumping out water into the water line by use of an electrical submersible pump (ESP). Drawdown control was designed to regulate the liquid level (or hydrostatic pressure) in the gas line by controlling the ESP frequency and the water-line surface backpressure. Analysis of production data supported by flow simulations indicated that continuous water production through the gas line was the main reason for the loss of drawdown control. The trigger of the water production was that the water column in the gas line reached surface because of the rising water level resulting from the produced gas, which also lightened the water column and lowered the BHP. Consequently, the continuous water production made it difficult to regulate the drawdown as intended. The analysis concluded that the risk of water production through the gas line could be significantly lowered if a choke valve was installed at the surface gas line and/or the ESP had high tolerance to the presence of free gas. This first field trial has provided valuable information in understanding the methane-hydrate production system to further improve/develop strategies in controlling large drawdown in the system.
"Nanoparticle-based enhanced oil recovery (Nano-EOR)" is an improved waterflooding assisted by nanoparticles dispersed in the injection water. Many laboratory studies have revealed the effectiveness of Nano-EOR. An evaluation of the EOR effect is one of the most critical items to be investigated. However, risk assessments and mitigation plans are as essential as investigation of its effectiveness for field applications. This study examined the items to be concerned for applying Nano-EOR to the Sarukawa oil field, a mature field in Japan, and established an organized laboratory and field tests workflow. This paper discusses a laboratory part of the study in detail. This study investigated the effect and potential risks of the Nano-EOR through laboratory experiments based on the workflow. The laboratory tests used surface-modified nanosilica dispersion, synthetic brine, injection water, and crude oil. The oil and injection water were sampled from a wellhead and injection facility, respectively, to examine the applicability of the EOR at the Sarukawa oil field. The items of the risk assessment involved the influence on an injection well's injectivity, poor oil/water separation at a surface facility, and contamination of sales oil. A series of experiments intended for the Sarukawa oil field showed that 0.5 wt. % nanofluid was expected to contribute to significant oil recovery and cause no damage on an injection well for the reservoir with tens of mD. This is considered a favorable result for applying Nano-EOR to Sarukawa oil field because it contains layers of tens mD. Furthermore, the experiments also showed that 0.5 wt.% nanofluid did not lead to poor oil/water separation and contamination of sales oil. Thus, field tests are designed with this concentration. This paper introduces the entire study workflow and discusses the detailed procedure and results of experiments investigating the Nano-EOR effect and potential risks.
30 January 2023 in SPE Reservoir Evaluation & Engineering
Summary: Microbial DNA-based monitoring is a promising tool for reservoir monitoring that has been used mainly for shale reservoir development. In this study, long-term microbial DNA-based monitoring was applied to the Sarukawa oil field, which has a complex reservoir structure with no practical simulation model available. Fluid samples were collected periodically from nine production wells and two injection wells from October 2019 to July 2021. DNA was extracted from the samples, and the microbial composition was analyzed by 16S ribosomal ribonucleic acid (rRNA) gene amplicon sequencing and real-time polymerase chain reaction (PCR). Based on similarities between the microbial profiles, the samples were classified into seven clusters that corresponded closely to the original fluid type (i.e., injection or production fluid) and specific environment (e.g., geological strata or compartments). A comparative analysis of the microbial profiles suggested possible well connectivity and water breakthrough. These results demonstrate that microbial DNA-based monitoring can provide useful information for optimizing production processes (e.g., waterflooding) in mature oil fields.
Nanoparticle-based enhanced oil recovery (Nano-EOR) is an improved waterflooding assisted by nanoparticles dispersed in injection water (nanofluid). Although Nano-EOR has been revealed to become a promising technique from many laboratory experiments, field applications are still limited. This paper discusses the first Nano-EOR field pilot tests for the Sarukawa oil field in Japan. The field pilot tests were divided into two stages: short-term injection test and long-term inter-well test. The short-term injection test was performed mainly to investigate the effects of nanofluid on the well injectivity. Nanofluid was injected into an existing water injection line by an air-driven liquid pump at a concentration of 0.5 wt. % which was optimized in the series of our study. The result of the short-term injection test showed that the nanoparticles used in this study can be injected into the target formation without any damage when the concentration is properly controlled. For the long-term inter-well test, 0.5 wt. % nanofluid was injected into the injection well for two months to validate the increase in oil production. The production behavior was monitored frequently and compared to the reference decline curve. Inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis of the production fluid was also performed to detect the breakthrough of the injected nanoparticles. Although nanoparticles were not detected in the producer well, the oil production rate showed a positive deviation from the estimated baseline decline curve, suggesting an increase in oil production due to the nanoparticles injected from the injector. This paper has made a comprehensive discussion and summary of the challenges based on the current status of the long-term inter-well test. This study established a simple pilot scheme for Nano-EOR and this will contribute to the upcoming Nano-EOR projects.
Strategic petroleum reserves are critical for energy security. In Japan, 0.5 million kiloliters of crude oil (12% of the state-owned reserves) is stored using underground rock-cavern tanks, which comprise unlined horizontal tunnels bored into bedrock. Crude oil is held within the tank by water inside the tank, the pressure of which is kept higher than that of the crude oil by natural groundwater and irrigation water. This study applied microbial DNA-based monitoring to assess the water environments in and around national petroleum-stockpiling bases (the Kuji, Kikuma, and Kushikino bases) using the rock-cavern tanks. Forty-five water samples were collected from the rock-cavern tanks, water-supply tunnels, and observation wells. Principal-component analysis and hierarchical clustering indicated that microbial profiles of the water samples reflect the local environments of their origins. Particularly, the microbial profiles of water inside the rock-cavern tanks were distinct from other samples, revealing biological conditions and hence environmental characteristics within the tanks. Moreover, the clustering analysis indicated distinct features of water samples that have not been detected by other monitoring methods. Thus, microbial DNA-based monitoring provides valuable information on the in situ environments of rock-cavern tanks and can serve as an extremely sensitive measurement to monitor the underground oil storage.